Miles Lubricants
Miles Lubricants MSF1422003 Gear Oil 220 ISO 90W SAE 35 lb pail
Synthetic gear oil for enclosed gearboxes, chains and bearings, ISO 220, SAE 90W, operating from -36 °F to 200 °F in a 35 lb pail
- ColorAmber
- ISO 220 viscosity protects heavy-duty gearboxes
- SAE 90W grade suits enclosed gear drives
- Synthetic base oil operates from -36 °F to 200 °F
- High 207 viscosity index maintains film strength
- 448 °F flash point adds safety margin
Application scope
This gear oil is formulated for enclosed gearboxes, heavy-duty chains, bearings, blowers, slideways and guide posts. It is not suited for open gearing, hypoid axles or applications requiring extreme-pressure additives.
Viscosity match
The lubricant carries ISO VG 220 and SAE 90W ratings with a viscosity index of 207. Selecting the correct viscosity grade is the single factor that determines whether the oil will protect the equipment.
Capacity and limits
The 35 lb pail supplies enough fluid for multiple large gearbox fills or extended chain lubrication intervals. It performs reliably between 0 and 200 Degrees F and has a pour point of -36 Degrees F, so it is not intended for service outside that temperature range.
Highlights
- ISO 220 viscosity protects heavy-duty gearboxes
- SAE 90W grade suits enclosed gear drives
- Synthetic base oil operates from -36 °F to 200 °F
- High 207 viscosity index maintains film strength
- 448 °F flash point adds safety margin
Specifications
| Brand | MILES LUBRICANTS |
|---|---|
| Color | Amber |
Questions about this item
How does the ISO 220 viscosity perform inside an enclosed gearbox running at the rated temperature limits?
The oil maintains its synthetic film between 0 and 200 degrees F with a viscosity index of 207, protecting gears, bearings, chains and slideways across that range.
What does the SAE 90W rating tell me about cold-start flow and high-temperature protection?
SAE 90W classifies the oil's weight at operating heat, while the pour point of -36 degrees F shows it still flows in freezing conditions.
Will the 35 lb pail fit through a standard plant doorway and sit on a typical drum shelf?
The pail container is designed for industrial handling; its 35 lb fill weight and amber synthetic oil allow manual positioning on common shelving.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
