Miles Lubricants
Miles Lubricants MSF1411003 Gear Oil Pail 150 ISO 90W SAE Yellow
Synthetic gear oil rated ISO 150 and SAE 90W in a 35 lb yellow pail meeting U.S. Steel 224, AGMA 9005 and DIN 51517 standards
- ColorYellow
- Synthetic base oil protects gears across extreme temperatures
- ISO 150 viscosity grade matches heavy-duty gearbox requirements
- SAE 90W rating ensures proper film strength at load
- Meets U.S. Steel 224, AGMA 9005 and DIN 51517 standards
- Wide operating range from -35 °F pour point to 515 °F flash point
Gear oil for industrial gearboxes
Miles Lubricants MSF1411003 is a synthetic gear lubricant formulated for enclosed industrial gearboxes that require ISO VG 150 viscosity. It meets U. S. Steel 224, AGMA 9005 and DIN 51517 Part 1, 2, 39 specifications for heavy-duty service.
ISO VG 150 capacity and temperature limits
The fluid operates from 0 °F to 195 °F with a viscosity index of 125 and a flash point of 515 °F. It provides adequate film strength for moderate loads but lacks extreme-pressure additives for severe shock-loading conditions.
35 lb pail with no additive package
Supplied in a yellow 35 lb pail, the oil contains no supplemental additives, so it will not replenish depleted EP chemistry in systems that require it. Users needing NSF-rated or additised formulations must select a different product.
Highlights
- Synthetic base oil protects gears across extreme temperatures
- ISO 150 viscosity grade matches heavy-duty gearbox requirements
- SAE 90W rating ensures proper film strength at load
- Meets U.S. Steel 224, AGMA 9005 and DIN 51517 standards
- Wide operating range from -35 °F pour point to 515 °F flash point
Specifications
| Brand | MILES LUBRICANTS |
|---|---|
| Color | Yellow |
Questions about this item
Will this 90W SAE gear oil work in an older gearbox that previously used mineral-based lubricant?
The synthetic base oil meets U. S. Steel 224, AGMA 9005 and DIN 51517 Part 1, 2, 39 standards, so it is compatible with gearboxes specifying those approvals; always drain the old fluid completely before filling.
How can I verify the oil is performing correctly once the gearbox is back in service?
Monitor operating temperature — the fluid is rated from 0 °F to 195 °F — and check for unusual noise or leakage; a stable viscosity index of 125 across that range indicates proper function.
The 35 lb pail arrives sealed — do I need any extra fittings or pumps to dispense it?
The container is a standard pail with no dispensing hardware included; a separate hand pump or pour spout sized for a 5-gallon pail opening will be required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
