Miles Lubricants
Miles Lubricants MSF1200107 Hydraulic Oil 32 ISO 10W 16 oz
Hydraulic oil with ISO 32 viscosity and 10W grade, synthetic base, biodegradable, operating from -15 to 200 degrees F in a 16 oz bottle
- Biodegradable formula meets EPA VGP-EAL standards for environmental compliance
- Synthetic base oil performs from -15 °F to 200 °F operating range
- Low pour point of -44 °F ensures flow in cold conditions
- High flash point of 435 °F adds safety margin in hydraulic systems
- 16 oz bottle of ISO 32 / SAE 10W grade suits targeted maintenance tasks
Hydraulic Oil ISO 32 10W
This synthetic hydraulic oil carries an ISO viscosity grade of 32 and an SAE grade of 10W. It is designed for hydraulic systems that require a clear, biodegradable fluid meeting EPA VGP-EAL compliance. The 16 oz bottle suits maintenance tasks where a small volume is preferred.
Check system specs before ordering
Verify that your equipment calls for ISO 32 viscosity and 10W grade fluid. Confirm the operating temperature range of -15 to 200 degrees Fahrenheit matches the machinery requirements. Ensure the system does not require specific additives, as this product contains none.
Sustained load behaviour
The fluid maintains viscosity across a wide temperature span with a pour point of -44 degrees Fahrenheit and a flash point of 435 degrees Fahrenheit. Its synthetic base and biodegradable formulation resist breakdown during extended hydraulic system operation. The clear colour allows visual inspection of fluid condition over time.
Highlights
- Biodegradable formula meets EPA VGP-EAL standards for environmental compliance
- Synthetic base oil performs from -15 °F to 200 °F operating range
- Low pour point of -44 °F ensures flow in cold conditions
- High flash point of 435 °F adds safety margin in hydraulic systems
- 16 oz bottle of ISO 32 / SAE 10W grade suits targeted maintenance tasks
Specifications
| Brand | MILES LUBRICANTS |
|---|
Questions about this item
Does the 16 oz bottle include a dispenser or do I need to buy a pour spout separately?
The product ships as a 16 oz bottle of hydraulic oil with no dispenser or pour spout included; a separate funnel or spout is required for controlled pouring.
Should I choose the ISO 32 10W grade or a different viscosity for my hydraulic system?
Select this ISO 32 10W grade when the equipment manufacturer specifies ISO VG 32 or SAE 10W fluid; it covers operating temperatures from -15 °F to 200 °F.
What does the 435 °F flash point mean for daily use in a hydraulic pump?
A 435 °F flash point indicates the oil resists ignition well above normal hydraulic system temperatures, reducing fire risk during high-temperature operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
