We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact indoor network switch with eight Ethernet ports and SFP+ cage

Mikrotik

Mikrotik RB5009UPr+S+IN network switch 1.4GHz 1GB 7xGb 1x2.5Gb 1xSFP+

SKU CH-FTZV-74EBS

Eight-port switch with 2.5GbE, SFP+ and PoE on every port, powered by a 1.4GHz quad-core ARM CPU

  • ARM 64-bit architecture with 4-core CPU at 1.4 GHz max
  • 1 GB RAM and 1 GB storage run RouterOS v7
  • 7× Gigabit, 1× 2.5 Gb, 1× SFP+ for fiber uplinks
  • PoE-in and PoE-out on all 8 Ethernet ports
  • 10 power-input options, 24–57 V range, 130 W total PoE budget

Mikrotik RB5009UPr+S+IN 8-port PoE switch

The Mikrotik RB5009UPr+S+IN is a managed network switch with eight Ethernet ports and one SFP+ cage. Seven ports run at 1 Gb, one at 2.5 Gb, and the SFP+ cage supports 10 Gb fiber uplinks. Every Ethernet port handles both PoE-in and PoE-out for flexible power distribution. It targets network engineers and integrators who need redundant power and high port density in a compact chassis.

Installation and common issues

The unit runs RouterOS v7 on a 4-core ARM 64bit CPU clocked between 350 and 1400 MHz with 1 GB RAM and 1 GB storage. Mount it in a rack or on a desk, connect the DC jack or 2-pin terminal for primary power, and add a second source for redundancy. Do not mix different input voltages on the two connectors. Configure PoE-out budgets per port in RouterOS to stay within the 130 W total limit.

Pre-purchase checklist

Verify that your power sources deliver between 24 and 57 V and that you can keep all sources at the same voltage. Confirm the 130 W aggregate PoE-out budget covers every device you plan to power, noting each port caps at 25 W. Ensure your fiber modules match the SFP+ cage and that RouterOS v7 meets your feature requirements.

Highlights

  • ARM 64-bit architecture with 4-core CPU at 1.4 GHz max
  • 1 GB RAM and 1 GB storage run RouterOS v7
  • 7× Gigabit, 1× 2.5 Gb, 1× SFP+ for fiber uplinks
  • PoE-in and PoE-out on all 8 Ethernet ports
  • 10 power-input options, 24–57 V range, 130 W total PoE budget

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the RB5009UPr+S+IN is operating correctly after installation?

Check the RouterOS v7 dashboard for CPU load across the four ARM 64-bit cores running at 350–1400 MHz, confirm all eight Ethernet links show active status, and monitor the PoE-out budget to ensure total draw stays within the 130 W limit.

What ships with the RB5009UPr+S+IN and what must I purchase separately?

The unit includes the switch with 1 GB RAM, 1 GB storage, seven 1 Gb ports, one 2.5 Gb port, one SFP+ cage, a DC jack and a 2-pin connector; you must supply SFP+ modules, Ethernet cables and a 24–57 V power source.

Which RB5009UPr+S+IN variant should I choose for my deployment?

This single SKU delivers 1.4 GHz quad-core performance, RouterOS license level 5, full PoE-in and PoE-out on all eight RJ45 ports at up to 25 W each, plus redundant 24–57 V input options — select it when you need maximum port density and power flexibility in the compact chassis.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.