We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six 250 g spools of 1.75 mm silk PLA in dual-colour finishes

MIKA3D Bicolor Dual Color Silk PLA 1.75mm 6×250g filament

SKU CH-ZMH3-X1ME2

Six dual-colour silk PLA spools totalling 1.5 kg with a 1.75 mm diameter for multi-colour FDM printing

  • Color6 Spools - Silk Black-orange; Silk Red-gold; Silk Black-red;
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight1.5 kilograms
  • Pearlescent finish without polishing thanks to silk PLA coextrusion
  • Six colour-change spools in one bundle totalling 1.5 kg
  • 75 mm diameter with tight tolerance for consistent feeding on most FDM printers
  • 100 % tangle-free winding so filament feeds straight from the spool
  • Low-odour, bubble-free material that prints smoothly with minimal warping

Six-spool silk PLA bundle

This bundle contains six 250 g spools of 1.75 mm bicolour silk PLA, giving a total of 1.5 kg of filament. Each spool combines two metallic shades in a single co-extruded strand for multi-colour prints without tool changes. The material is standard polylactic acid optimised for FDM printers and 3D pens.

Consistent flow on long prints

The filament holds a tight 1.75 mm diameter tolerance to maintain steady feeding during extended jobs. Low odour, bubble-free melting and good layer adhesion reduce warping and jamming over many hours. A fresh 0.4 mm or larger nozzle is recommended to preserve the silk surface finish throughout the build.

Makers moving up from single-colour PLA

Users printing with basic monotone PLA gain instant colour variation without a multi-material upgrade. The pack suits hobbyists who want decorative models, gifts or display pieces with a pearlescent sheen. It does not replace engineering-grade filaments for functional parts requiring high heat resistance or mechanical strength.

Highlights

  • Pearlescent finish without polishing thanks to silk PLA coextrusion
  • Six colour-change spools in one bundle totalling 1.5 kg
  • 75 mm diameter with tight tolerance for consistent feeding on most FDM printers
  • 100 % tangle-free winding so filament feeds straight from the spool
  • Low-odour, bubble-free material that prints smoothly with minimal warping

Specifications

BrandMIKA3D
ModelBicolor Dual Color Silk 3D Printer PLA
Color6 Spools - Silk Black-orange; Silk Red-gold; Silk Black-red; Silk Gold-copper; Silk Green-blue; Silk Green-purple
MaterialPolylactic Acid
Diameter1.75
Weight1.5 kilograms

Questions about this item

Does the 1.75 mm silk PLA produce strong odour or warping during long prints?

The filament is described as low odour with no warping, feeding smoothly and melting well for consistent extrusion over extended sessions.

What printer hardware is required to use these six 250 g spools?

Any FDM 3D printer or 3D pen that accepts 1.75 mm filament; the supplier notes compatibility with popular brands such as Creality Ender, Anycubic, Flashforge and others.

Will the dual-colour silk PLA work reliably on an older printer with a standard 0.4 mm nozzle?

Yes — the manufacturer recommends a new 0.4 mm or larger nozzle and the 1.75 mm diameter tolerance is designed for consistent feeding on most FDM machines.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.