We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow three-piece rainsuit with detachable hood, polyester PVC material, snap closures, size M

Mik

Mik 35100-M 3-Piece Rainsuit with Detachable Hood, Yellow, Size M, 0.3 mm

SKU CH-YVGM-2F6P5

A three-piece yellow rainsuit with a detachable hood, polyester and PVC construction, snap closures, two coat pockets and a lined interior for wind resistance

  • ColorYellow
  • Three-piece suit covers jacket, bib overall and detachable hood
  • 3 mm polyester-PVC laminate blocks wind and rain
  • Yellow colour improves visibility on wet job sites
  • Snap front and drawstring hood seal out driving rain
  • Two coat pockets and 31 in jacket length add practical storage

Three-Piece Rainsuit Overview

The Mik 35100-M is a yellow, 0.3 mm rainsuit made from polyester and PVC. It includes a jacket, bib overall, and a detachable hood with drawstring closure. The suit is wind resistant and features a polyester and PVC lining. Jacket length measures 31 in and the inseam is 29 in. It is rated ANSI Class Not Rated and is not high-visibility.

Intended Users and Limitations

This suit suits workers needing basic wet-weather protection for grounds maintenance or outdoor tasks where high-visibility certification is not required. Buyers who need ANSI-rated high-visibility gear or a heavier-duty thickness should look at something else. The snap closures on the jacket and fly offer simple fastening but may not seal as tightly as zippered storm flaps in driving rain.

Installation and Common Issues

Putting the suit on is straightforward: snap the jacket front, secure the bib overall straps, and attach or remove the hood via its drawstring. The detachable hood can snag on the snap points if not aligned carefully. Snaps may loosen after repeated laundering, so check them before each use. The 0.3 mm material tears more easily than thicker alternatives if caught on sharp edges.

Highlights

  • Three-piece suit covers jacket, bib overall and detachable hood
  • 3 mm polyester-PVC laminate blocks wind and rain
  • Yellow colour improves visibility on wet job sites
  • Snap front and drawstring hood seal out driving rain
  • Two coat pockets and 31 in jacket length add practical storage

Specifications

ColorYellow
BrandMIK

Questions about this item

What measurements should I check on my current workwear to confirm the 31 in jacket length and 29 in inseam will fit?

Compare the 31 in jacket length and 29 in inseam against your existing jacket and bib overall; the snap closures on the jacket and fly allow quick on-and-off over layered clothing.

Can the detachable hood and snap-front jacket be worn over a hard hat and tool belt without restricting movement?

The drawstring hood removes entirely, and the snap-front jacket plus snap-fly bib overall open wide enough to clear a hard hat and accommodate a tool belt underneath.

How do I verify the 0.3 mm polyester-PVC laminate is sealing out wind and rain after I put it on?

Zip the jacket snaps, tighten the hood drawstring, and stand in a steady breeze or light spray — no air should penetrate the front closure or seams, and water should bead and run off the yellow surface.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.