MIDWEST FASTENER CORP
MIDWEST FASTENER CORP Coupling Nut #10-24 Steel Zinc 3/4 in 50
Connects two #10-24 threaded rods end-to-end with 3/4 inch length, steel zinc-plated, pack of 50
- TypeNuts
- Connects two threaded rods end-to-end with internal threads meeting in the centre
- #10-24 thread size fits matching rods for secure alignment
- Steel construction provides structural strength for load-bearing joints
- Zinc plating resists corrosion in damp or outdoor environments
- 3/4 inch length offers sufficient thread engagement for stable connections
Threaded Rod Connector
This coupling nut joins two #10-24 threaded rods end to end. The 3/4 inch length provides engagement on both sides so the rods meet in the centre. Steel construction with zinc plating resists corrosion in automotive and general hardware applications. The pack contains fifty pieces for volume assembly work.
Build Integration
The nut requires matching #10-24 rods or studs to function as a spacer or extender. No additional washers or lock nuts are included, so supply those separately if the joint needs locking or load distribution. Zinc plating allows use in damp environments without rapid rust formation. The bulk quantity suits maintenance bins or production lines.
Pack Contents
Fifty identical coupling nuts arrive in a single manufacturer package labelled 53775. No driver bits, thread sealant or installation guides are bundled. The free-shipping threshold of seventy-five dollars applies to the supplier order, not to this individual pack. Buyers needing fewer pieces or a different thread pitch must source another SKU.
Highlights
- Connects two threaded rods end-to-end with internal threads meeting in the centre
- #10-24 thread size fits matching rods for secure alignment
- Steel construction provides structural strength for load-bearing joints
- Zinc plating resists corrosion in damp or outdoor environments
- 3/4 inch length offers sufficient thread engagement for stable connections
Specifications
| Brand | MIDWEST FASTENER |
|---|---|
| Type | Nuts |
Questions about this item
How far can a #10-24 threaded rod extend into each end of the 3/4 in coupling nut before the threads meet?
The nut is tapped from both sides to meet in the middle, so each #10-24 rod can engage up to roughly half the 3/4 in length before the threads converge.
Will the zinc-plated steel nuts gall or overheat if I tighten and loosen them repeatedly in a day-long assembly job?
Zinc-plated steel resists galling under normal hand or wrench torque, and the nuts generate no heat themselves during repeated adjustments.
What thread pitch must the rods already have for these 50 coupling nuts to connect them?
The nuts are #10-24, so both rods must be #10-24 threaded for a proper fit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
