MIDWEST FASTENER CORP
MIDWEST FASTENER CORP 67165 Grease Fitting 8mm-1.0 x 10mm x 22mm Zinc Fine Thread 90
A zinc-plated steel grease fitting with 8 mm by 1.0 mm fine threads, 10 mm hex and 22 mm overall length for 90-degree lubrication access
- 8 mm fine thread fits precise machinery applications
- 10 mm shank length suits standard installation depths
- 22 mm overall length reaches confined lubrication points
- Zinc plated steel resists corrosion in harsh environments
- 90 degree angle enables access to tight fittings
Grease Fitting for Mechanical Lubrication
This 8 mm fine-thread fitting installs permanently in machinery to accept a standard grease gun. Zinc-plated steel resists corrosion in shop and field conditions. The 90-degree angle allows access where straight fittings cannot reach. Maintenance technicians use it to keep bearings and joints lubricated without disassembly.
Behaviour Under Sustained Load
The hardened steel body and plated finish withstand repeated high-pressure grease injection cycles. Threads remain sealed after many attachment and removal sequences with a grease gun. The 90-degree bend does not restrict flow during continuous pumping. Corrosion resistance holds up in environments with moisture, coolant splash or road salt.
Replaces Worn or Inaccessible Fittings
Use this fitting to replace damaged straight or angled nipples on existing equipment. The 10 mm thread length and 22 mm overall length match common metric mounting holes. The upgrade is worth it when the old fitting leaks, strips or points in a direction that blocks the grease gun. Buyers who need a different thread pitch or a straight body should look elsewhere.
Highlights
- 8 mm fine thread fits precise machinery applications
- 10 mm shank length suits standard installation depths
- 22 mm overall length reaches confined lubrication points
- Zinc plated steel resists corrosion in harsh environments
- 90 degree angle enables access to tight fittings
Specifications
| Brand | MIDWEST FASTENER |
|---|
Questions about this item
How much heat does the 8mm-1.0 grease fitting generate during continuous operation?
The fitting is a passive metal component with no moving parts or electrical load, so it produces no measurable heat when lubricant is pumped through it.
What thread size must the host component already have to accept this 8mm-1.0 fine-thread fitting?
The mating hole must be tapped to an 8mm diameter with a 1.0mm fine-thread pitch for the fitting to install correctly.
Will the 22mm overall length clear the same space as the older 90-degree fitting I am replacing?
This fitting has a 22mm overall length and a 90-degree angle; compare those dimensions to the removed part to confirm clearance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
