MIDWEST FASTENER CORP
MIDWEST FASTENER CORP 60891 T-Nut #6-32 Steel Zinc 20 Pack
Pack of twenty #6-32 steel T-nuts with zinc plating for stronger threads in soft wood
- TypeNuts
- #6-32 thread fits standard machine screws
- Zinc-plated steel resists corrosion in damp conditions
- Pronged base anchors securely into soft wood
- 20-piece pack supplies multiple mounting points
- 1/4 in barrel height suits thin panels
T-Nuts for Wood Assembly
The Midwest Fastener 60891 pack supplies twenty steel tee nuts with a #6-32 thread and zinc plating. They are designed to embed into soft wood and create a durable mounting point for machine screws or bolts. This hardware suits furniture builders, cabinet makers and hobbyists who need repeatable fastening in timber.
Holding Power Under Load
Once driven into the workpiece, the prongs grip the wood fibres and resist pull-out when a bolt is tightened repeatedly. The zinc coating protects the steel from surface corrosion during extended indoor use. The barrel height allows full thread engagement without bottoming out in typical stock thicknesses.
#6-32 Thread Specification
The single critical detail is the #6-32 thread pitch, which determines bolt compatibility. Buyers who need a coarser or finer thread, or a different diameter, must select another part. These nuts will not accept metric bolts or imperial sizes other than #6-32.
Highlights
- #6-32 thread fits standard machine screws
- Zinc-plated steel resists corrosion in damp conditions
- Pronged base anchors securely into soft wood
- 20-piece pack supplies multiple mounting points
- 1/4 in barrel height suits thin panels
Specifications
| Brand | MIDWEST FASTENER |
|---|---|
| Type | Nuts |
Questions about this item
Will the zinc-plated steel T-nuts stay cool and quiet when driven into wood all day?
They are passive metal fasteners with no moving parts, so they generate no heat and make no noise during installation or use.
What size drill bit and wood thickness do I need for the 1/4 in barrel height?
Drill a hole that matches the barrel diameter and use material at least 1/4 in thick so the prongs seat fully.
Can these #6-32 T-nuts replace older imperial tee nuts in my existing jigs?
Yes, the #6-32 thread matches standard imperial hardware, so they fit the same bolts and fixtures you already use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
