MIDWEST FASTENER CORP
MIDWEST FASTENER CORP 53962 Blind Rivet Dome Head 3/16 in 1/4 in 18-8
A blind rivet with a dome head for single-sided fastening of 3/16 in holes
- TypeRivets
- Blind rivet joins materials from one side only
- Dome head provides a smooth finished appearance
- 18-8 stainless steel resists corrosion in harsh environments
- 3/16 inch diameter fits standard drilled holes
- 1/4 inch grip length suits thin material stacks
Fastener for single-sided access
MIDWEST FASTENER CORP 53962 is a blind rivet designed for joints reachable from only one side. The tubular body contains a central mandrel that expands the rivet when pulled and then snaps off. It suits maintenance, repair and assembly tasks where the back of the workpiece cannot be reached.
Replaces solid rivets and threaded fasteners
Switching from solid rivets removes the need for a bucking bar on the far side. Moving from screws or bolts eliminates tapping or nut access. The change is worthwhile whenever the joint is blind, vibration resistance matters and a permanent mechanical lock is preferred over adhesive bonding.
Suits thin-sheet metal and composite panels
Technicians joining sheet metal, ductwork or non-structural composites will find the dome head distributes load without countersinking. Builders needing high-shear structural joints, load-critical aerospace grades or removable assemblies should select a different fastener type.
Highlights
- Blind rivet joins materials from one side only
- Dome head provides a smooth finished appearance
- 18-8 stainless steel resists corrosion in harsh environments
- 3/16 inch diameter fits standard drilled holes
- 1/4 inch grip length suits thin material stacks
Specifications
| Brand | MIDWEST FASTENER |
|---|---|
| Type | Rivets |
Questions about this item
What hole diameter does the 3/16 in blind rivet require?
Drill a 3/16 in hole through both parts so the rivet body fits before the mandrel is pulled.
Which tool correctly installs the 53962 dome-head rivet?
Use a hand or pneumatic blind-rivet tool that pulls the mandrel until it snaps, expanding the rivet tail.
When should the 18-8 stainless rivets be replaced?
Replace if the dome head shows corrosion pitting, the mandrel breaks flush without expanding, or the joint loosens under vibration.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
