MIDWEST FASTENER CORP
MIDWEST FASTENER CORP 53945 Blind Rivet Dome Head 1/4 in Dia 1/2 in L Aluminum hardware
Blind rivet with dome head joins materials from one side using a mandrel that snaps off after expansion
- TypeRivets
- Blind rivet installs from one side only
- Dome head provides flush finish after setting
- Aluminium construction resists corrosion in use
- Mandrel snaps off cleanly during installation
- Tubular design expands to clamp parts together
What this rivet is for
This blind rivet joins materials when only one side of the joint is reachable. The tubular body holds a central mandrel that is pulled by a rivet tool to expand the far end and then snap off. It is suited to maintenance, fabrication and repair tasks where back-side access is blocked.
When to choose this style
A blind rivet replaces solid rivets, screws or bolts in single-access situations such as closed panels, tubes or enclosed frames. The switch is worth it when disassembly for back-side work is impractical or when speed of installation matters more than maximum shear strength. The dome head provides a low-profile finish on the visible surface.
How it fits the job
The rivet installs with a standard hand or pneumatic rivet tool and requires a correctly sized drilled hole through the workpieces. Aluminium construction keeps weight low and resists corrosion in many environments. The mandrel breaks cleanly at a designed point, leaving no protruding fastener on the blind side and freeing the tool for the next cycle.
Highlights
- Blind rivet installs from one side only
- Dome head provides flush finish after setting
- Aluminium construction resists corrosion in use
- Mandrel snaps off cleanly during installation
- Tubular design expands to clamp parts together
Specifications
| Brand | MIDWEST FASTENER |
|---|---|
| Type | Rivets |
Questions about this item
What hole diameter does the 1/4 in rivet require?
Drill a 1/4 in hole through the parts to be joined before inserting the rivet assembly.
How do you set the rivet and what step is often missed?
Use a pop-rivet tool to pull the mandrel until it snaps off; forgetting to let the mandrel break cleanly leaves a loose joint.
When does the mandrel need replacement?
The mandrel snaps off during each installation, so a fresh rivet is required for every new hole.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
