MIDWEST FASTENER CORP
MIDWEST FASTENER CORP 53943 Blind Rivet Dome Head 1/4 in Dia 1/4 in L Aluminum hardware
Blind rivet with a dome head joins materials from one side using a mandrel that snaps off after expansion
- TypeRivets
- Blind rivet joins materials from one side only
- Dome head provides a smooth finished appearance
- Aluminium construction resists corrosion in outdoor use
- 1/4 inch diameter suits standard hole sizes
- 1/4 inch grip length fits thin sheet assemblies
Blind Rivet Dome Head 1/4 in
This new MIDWEST FASTENER blind rivet is a tubular fastener supplied with a central mandrel. It joins parts when access is available from only one side. The assembly is inserted into a pre-drilled hole and a rivet tool draws the mandrel to expand the blind end before it snaps off.
Suited for single-side assembly tasks
Mechanics and fabricators who can reach the joint from one face will find this aluminum rivet practical. It is not intended for applications where solid rivets driven from both sides are required. Buyers needing a different diameter, length or material should select another fastener.
1/4 inch diameter and 1/4 inch length
These two dimensions determine whether the rivet fits the prepared hole and accommodates the total material thickness. Verify both measurements against your drawings before ordering to ensure a correct joint.
Highlights
- Blind rivet joins materials from one side only
- Dome head provides a smooth finished appearance
- Aluminium construction resists corrosion in outdoor use
- 1/4 inch diameter suits standard hole sizes
- 1/4 inch grip length fits thin sheet assemblies
Specifications
| Brand | MIDWEST FASTENER |
|---|---|
| Type | Rivets |
Questions about this item
How does the 1/4 inch diameter and 1/4 inch length determine the grip range when the rivet is set?
The 1/4 inch diameter and 1/4 inch length set the maximum material thickness the rivet can clamp; the mandrel pulls the blind end to form a second head, creating a permanent joint from one side.
What tooling standard does this blind rivet require for installation?
A standard hand or pneumatic rivet gun designed for 1/4 inch diameter blind rivets is needed to pull the mandrel and expand the rivet body.
What hole size and material thickness suit the 1/4 inch diameter aluminum dome head?
Drill a 1/4 inch clearance hole through both pieces; the 1/4 inch length rivet works best when the combined material thickness matches the rivet's grip range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
