MIDWEST FASTENER CORP
MIDWEST FASTENER CORP 53773 Coupling Nut #6-32 Steel Zinc 50 PK
Connects two #6-32 threaded rods end to end in a 50-pack of zinc-plated steel
- TypeNuts
- #6-32 thread connects two rods securely
- 1/2 inch length provides solid engagement
- Zinc-plated steel resists corrosion in use
- 50-piece pack covers multiple project needs
- Coupling nut design joins rods end-to-end
Coupling Nut #6-32
This coupling nut joins two #6-32 threaded rods end to end by tapping from each side to meet in the middle. It is sold as a 50-pack for maintenance, repair or assembly tasks that require extended rod connections. The steel body with zinc plating resists corrosion in typical indoor and outdoor environments.
Thread Specification #6-32
The single specification that determines fit is the #6-32 thread size. Only rods or studs cut to this exact pitch will engage properly; any other thread series will not mate with this nut. Verify the rod specification before ordering to avoid mismatched hardware.
Sustained Load Behaviour
Under continuous tension the zinc-plated steel nut maintains its grip without stripping, provided the mating rods are fully engaged to the centre stop. The 50-piece quantity supports repeated disassembly and reassembly cycles in long-term installations.
Highlights
- #6-32 thread connects two rods securely
- 1/2 inch length provides solid engagement
- Zinc-plated steel resists corrosion in use
- 50-piece pack covers multiple project needs
- Coupling nut design joins rods end-to-end
Specifications
| Brand | MIDWEST FASTENER |
|---|---|
| Type | Nuts |
Questions about this item
How does the #6-32 thread work when joining two rods in a machine?
The nut is tapped from both ends so the threads meet in the centre, letting two #6-32 rods screw in from opposite sides and butt together inside the 1/2 in long body.
What does the zinc-plated steel construction limit in corrosive environments?
Zinc plating resists rust in dry indoor use but will degrade faster than stainless or hot-dip galvanised steel if exposed to moisture, salt spray or chemicals.
What clearance is needed to install the 1/2 in long coupling nut?
You need at least 1/2 in of straight thread engagement on each rod plus room for a wrench on the hex flats, so plan for roughly 1 in of accessible threaded length per side.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
