MIDWEST FASTENER CORP
MIDWEST FASTENER CORP 52254 3/16" Quick Links 10PK conveying
Pack of ten 3/16-inch quick links for lifting, pulling and conveying tasks
- Ten-pack supplies multiple links for various tasks
- 3/16 inch size fits compatible chain and rope
- Quick-link design allows fast, tool-free connection
- Suitable for lifting, pulling and conveying work
- New condition ensures full rated strength out of box
3/16-Inch Quick Links 10-Pack
This pack supplies ten 3/16-inch quick links made by Midwest Fastener for lifting, pulling and conveying tasks. Each link provides a removable connection point that can be opened and closed without tools. The hardware suits industrial, agricultural and automotive jobs where temporary or adjustable rigging is required.
Suits riggers needing reusable 3/16-inch connectors
Buyers who want reusable 3/16-inch connectors for chain, rope or strap assemblies will find this pack convenient. Users who require a different diameter, a higher working-load rating or a permanent welded link should look at other hardware because this product is limited to the stated size and quick-link design.
Simple hand installation with no special tools
Each quick link opens by unscrewing the threaded sleeve, allowing the user to insert chain or rope before tightening by hand. The most common issue is cross-threading the sleeve if it is forced, which can prevent a secure closure; aligning the threads before tightening avoids this problem.
Highlights
- Ten-pack supplies multiple links for various tasks
- 3/16 inch size fits compatible chain and rope
- Quick-link design allows fast, tool-free connection
- Suitable for lifting, pulling and conveying work
- New condition ensures full rated strength out of box
Specifications
| Brand | MIDWEST FASTENER |
|---|
Questions about this item
What chain or rope diameter fits the 3/16" quick links?
The 3/16 inch size matches chain or rope of the same diameter; use links rated for the same working load limit as your rigging.
Can I mix these zinc-plated links with stainless hardware on the same load?
Mixing zinc-plated and stainless components is possible, but the galvanic couple may accelerate corrosion on the zinc links in wet conditions.
How do I confirm each link is seated correctly after closing?
Screw the threaded sleeve until the pin shoulder contacts the body, then pull the assembly by hand to verify no gap remains at the joint.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
