We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Box of MIDWEST FASTENER blind rivets dome head 3/16 in diameter 19/32 in length

MIDWEST FASTENER CORP

MIDWEST FASTENER CORP 51077 Blind Rivet Dome Head 3/16 in 19/32 in hardware

SKU CH-G9T5-08BV7

Blind rivets join materials from one side using a 3/16 inch diameter and 19/32 inch length dome head

  • TypeRivets
  • Blind rivet joins materials from one side only
  • Dome head provides flush finish on exposed surface
  • 3/16 inch diameter suits standard hole sizes
  • 19/32 inch length accommodates varied material thicknesses
  • Supplied with mandrel for complete installation readiness

Blind rivet for single-side joints

This MIDWEST FASTENER blind rivet joins materials when you can only reach one side of the workpiece. The tubular body holds a central mandrel that expands the tail before snapping off. A dome head provides a finished, low-profile surface after installation.

Mandrel-snap installation method

The rivet is inserted into a pre-drilled hole and a rivet tool pulls the mandrel to form the blind-side clamp. Once the tail expands fully, the mandrel breaks at its designed weak point and separates. No separate fastener or access to the back face is required during assembly.

Suited for thin-panel and repair work

Builders fastening sheet metal, plastic or composite panels up to 19/32 inch total thickness will find the grip range practical. Users needing structural shear ratings, flush countersunk heads or larger diameter options should look at other fastener types.

Highlights

  • Blind rivet joins materials from one side only
  • Dome head provides flush finish on exposed surface
  • 3/16 inch diameter suits standard hole sizes
  • 19/32 inch length accommodates varied material thicknesses
  • Supplied with mandrel for complete installation readiness

Specifications

BrandMIDWEST FASTENER
TypeRivets

Questions about this item

How often will the 3/16 in diameter rivet need replacing under vibration?

The rivet is a permanent mechanical fastener; once the mandrel snaps off the joint remains secure unless the material itself fails.

What limits the grip range when joining thick panels with the 19/32 in length?

The 19/32 in shank length sets the maximum combined material thickness that can be clamped before the blind end cannot expand fully.

Does the steel mandrel generate heat during continuous installation with a rivet gun?

Installation is a brief mechanical pull; the tool does the work and the rivet itself produces no sustained heat or noise.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.