MIDWEST FASTENER CORP
MIDWEST FASTENER CORP 37365 3-1/2 Zinc Plated Steel Non-Mortise Hinges 2PK
Two zinc-plated steel non-mortise hinges install without mortising for quick cabinet or drawer attachment
- TypeCabinet & Drawer Hardware
- Zinc plated steel resists corrosion in daily use
- Non-mortise design installs without cutting recesses
- Two hinges per pack cover a standard door
- 3-1/2 inch size fits common cabinet doors
- Manufacturer direct shipping on orders over 75
What these hinges are and who they suit
The pack contains two zinc-plated steel non-mortise hinges sized at 3-1/2 inches. They are intended for cabinet and drawer hardware installations where a mortise cut is not required. DIY renovators and cabinet makers can fit them directly to the door and frame faces. Buyers who need concealed or soft-close hinges will not find those functions here.
Finish durability and fitting practicality
The zinc plating resists corrosion in typical indoor environments. No lubrication or special tools are needed for installation. The hardware adds negligible weight to the door or drawer. Installers who require stainless steel or brass finishes for matching existing hardware should look elsewhere.
The specification that decides fit
Model number 37365 identifies the exact hinge geometry and hole pattern. Verify that the 3-1/2 inch dimension matches your door and frame preparation before ordering. A different model number indicates a different size or hole layout and will not interchange.
Highlights
- Zinc plated steel resists corrosion in daily use
- Non-mortise design installs without cutting recesses
- Two hinges per pack cover a standard door
- 3-1/2 inch size fits common cabinet doors
- Manufacturer direct shipping on orders over 75
Specifications
| Brand | MIDWEST FASTENER |
|---|---|
| Type | Cabinet & Drawer Hardware |
Questions about this item
How are these non-mortise hinges installed, and what step do people often miss?
Align the hinge leaves flush with the door and frame edges, then secure with screws; the step often missed is pre-drilling pilot holes to prevent the zinc-plated steel from splitting the wood.
What maintenance will these zinc-plated steel hinges need over time?
Wipe the hinge leaves with a dry cloth to remove dust, then apply a light machine oil to the pin joint every six months to keep the swing smooth and protect the zinc finish.
What limit appears first when these hinges are used on a heavy cabinet door?
The 3-1/2 inch leaf length sets the load limit; once the door weight exceeds what two hinges can carry, the leaves will bow and the screws will pull loose.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
