MIDWEST FASTENER CORP
MIDWEST FASTENER CORP 36541 6mm-1.0 x 33.3mm Female Heim Joint 2PK
Two coarse-thread female Heim joints provide articulating linkage for steering and suspension components
- ColorTransparent
- Precision articulating linkage for steering and suspension systems
- 6 mm-1.0 coarse thread fits compatible rod ends
- 3 mm length suits standard tie-rod and control-arm setups
- Two joints per pack covers both sides of a single assembly
- New condition ensures full factory specification out of the box
6 mm Female Heim Joint Pair
This pack contains two 6 mm-1.0 coarse-thread female heim joints measuring 33.3 mm in length. They serve as rod-end bearings that provide precise articulating movement for steering linkage, tie rods and control arms. The joints are supplied new and ready for installation in compatible automotive assemblies.
Mechanics needing exact 6 mm rod ends
Technicians repairing or fabricating steering and suspension components that call for a 6 mm-1.0 female thread will find these joints a direct fit. Builders working with larger thread pitches, metric fine threads or imperial dimensions should source the correct specification instead.
Two-piece set for matched assemblies
The twin pack supplies enough joints for a single tie-rod or control-arm pair, giving equal wear characteristics on both sides of the vehicle. Projects requiring more than two joints or a different thread size will need additional or alternative hardware.
Highlights
- Precision articulating linkage for steering and suspension systems
- 6 mm-1.0 coarse thread fits compatible rod ends
- 3 mm length suits standard tie-rod and control-arm setups
- Two joints per pack covers both sides of a single assembly
- New condition ensures full factory specification out of the box
Specifications
| Brand | MIDWEST FASTENER |
|---|---|
| Color | Transparent |
Questions about this item
What thread size must the mating rod end or linkage have to fit the 6mm-1.0 coarse thread on these heim joints?
The mating part needs a matching 6mm-1.0 coarse thread to engage the female heim joint correctly.
Will the 33.3mm overall length align with the control-arm or tie-rod spacing on my existing suspension setup?
Measure the centre-to-centre distance on the current linkage; if it matches 33.3mm these joints will slot in without modification.
How can I verify the joints are articulating smoothly after installation?
Move the connected linkage through its full travel — there should be no binding, play or roughness at the joint.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
