We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Micron 5400 PRO 3.84TB SATA 2.5 inch solid state drive

Micron Technology, Inc.

Micron Technology, Inc. 5400 PRO 3.84TB SATA 2.5 accessory

SKU CH-CSRA-2ZH7V

A 3.84TB solid-state drive with a 2.5-inch SATA interface for laptop storage upgrades

  • 84 TB capacity stores large datasets
  • SATA interface connects to standard 2.5 in bays
  • 5400 PRO series built for mixed workloads
  • 3D TLC NAND increases endurance and density
  • 7 mm height fits slim laptop chassis

Micron 5400 PRO 3.84TB SATA SSD

The Micron 5400 PRO is a 3.84TB solid-state drive built for read-intensive workloads in laptops and embedded systems. It uses a 2.5-inch form factor and connects through the SATA interface. The 3D TLC NAND provides reliable endurance for mixed-use server and client applications.

Thermals noise and power draw

With no moving parts the drive runs silently and produces minimal heat during typical operation. Power consumption stays low because the SATA interface and 3D TLC architecture are optimised for efficiency. This makes it suitable for compact enclosures where airflow is limited.

Build integration and compatibility

The 2.5-inch 7mm height fits standard drive bays and caddies in most laptops and storage arrays. A SATA data cable and a SATA power connector are the only connections required. The drive frees up an M.2 slot for other expansion cards or a faster boot device.

Highlights

  • 84 TB capacity stores large datasets
  • SATA interface connects to standard 2.5 in bays
  • 5400 PRO series built for mixed workloads
  • 3D TLC NAND increases endurance and density
  • 7 mm height fits slim laptop chassis

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 2.5 in SATA 5400 PRO 3.84TB drive in a laptop bay?

Slide the 7 mm 2.5 in drive into the SATA bay, secure it with the caddy screws, and connect the SATA data and power cables; the step often missed is tightening the caddy so the connector stays seated.

What maintenance or replacement will the 3D TLC 5400 PRO 3.84TB SSD need later?

No scheduled maintenance is required; the drive will eventually reach its write endurance limit and should be replaced when SMART health indicators show critical wear.

What limit appears first on the 5400 PRO 3.84TB SATA SSD during sustained writes?

The SATA 6 Gb/s interface caps sequential throughput, so sustained write speeds plateau at the bus limit before the 3D TLC NAND reaches thermal throttle.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.