Micro 100
Micro 100 RSC-187-13 Engraving Tool 7/16" Carbide
Carbide engraving tool with a 60-degree tip and a 7/16-inch length of cut
- Carbide construction resists wear for longer tool life
- 60-degree included angle produces precise V-groove profiles
- 7/16 inch length of cut handles deep engraving passes
- Uncoated surface keeps cutting edges sharp on non-ferrous metals
- Micro 100 brand trusted by machinists for consistent quality
Micro 100 RSC-187-13 Engraving Tool
The Micro 100 RSC-187-13 is a single carbide engraving tool designed for precision marking and cutting tasks. It features a 60-degree included angle and an uncoated carbide construction suitable for a variety of materials. The length of cut measures 7/16 inch. This accessory targets machinists and fabricators requiring accurate detail work.
Practical limits of the carbide tool
The uncoated carbide substrate provides hardness and wear resistance for general-purpose engraving applications. A 60-degree point angle determines the geometry of the cut profile and limits the tool to specific V-groove widths. The 7/16 inch length of cut defines the maximum depth achievable in a single pass. Users must match feed rates to material hardness to prevent premature wear.
Checks before ordering
Verify that your tool holder or collet system accepts the shank dimensions required for this specific model number. Confirm the 60-degree angle matches the profile required for your engraving or chamfering operation. Ensure the 7/16 inch length of cut provides sufficient reach for the workpiece geometry. The tool is shipped directly from the manufacturer.
Highlights
- Carbide construction resists wear for longer tool life
- 60-degree included angle produces precise V-groove profiles
- 7/16 inch length of cut handles deep engraving passes
- Uncoated surface keeps cutting edges sharp on non-ferrous metals
- Micro 100 brand trusted by machinists for consistent quality
Specifications
| Brand | MICRO 100 |
|---|
Questions about this item
Which engraving tool should I choose if I need a 7/16" length of cut?
The RSC-187-13 is the only version listed with a 7/16" length of cut, a 60-degree included angle and a .004" tip radius, so it matches that exact requirement.
What does the 60-degree included angle mean when the tool is in the spindle?
It produces a 60-degree V-groove in the workpiece, giving a sharp, well-defined line for lettering or decorative cuts in materials such as aluminium, brass or mild steel.
What shank standard does this carbide engraving tool use and what does it limit?
The tool is a solid carbide blank with no separate shank standard; the 7/16" length of cut and .004" tip radius set the practical reach and minimum feature size you can achieve.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
