Micro 100
Micro 100 RNCM-060-2X Engraving Tool 8.00 mm 90° Carbide AlTiN
Double-end carbide engraving tool with 8.00 mm cut length and 90° angle
- Double-ended design gives two cutting edges per tool
- 90° included angle produces clean V-grooves and chamfers
- Solid carbide body resists wear in abrasive materials
- AlTiN coating reduces friction and extends tool life
- 00 mm length of cut suits a range of engraving depths
Micro 100 Engraving Tool 8.00 mm
The Micro 100 RNCM-060-2X is a double-ended engraving tool made from carbide with an AlTiN coating. It suits machinists and engravers who need a 90 degree included angle for V-grooving, chamfering or marking tasks in a workshop or light production environment.
8.00 mm length of cut capacity
The tool provides an 8.00 mm length of cut, giving enough reach for shallow to medium-depth engraving passes in metals and plastics. Deeper profiles or heavy stock removal will exceed the flute length and require a different tool or multiple setups to avoid deflection.
Carbide AlTiN coating limits
Carbide construction with AlTiN coating resists heat and wear during high-speed spindle work, but the material is brittle and can chip under interrupted cuts or excessive feed rates. The 90 degree geometry fixes the groove profile, so applications needing other included angles must use a separate cutter.
Highlights
- Double-ended design gives two cutting edges per tool
- 90° included angle produces clean V-grooves and chamfers
- Solid carbide body resists wear in abrasive materials
- AlTiN coating reduces friction and extends tool life
- 00 mm length of cut suits a range of engraving depths
Specifications
| Brand | MICRO 100 |
|---|
Questions about this item
Will the 8.00 mm cutting length suit the same collet and spindle I already run on my CNC router?
The tool is built with an 8.00 mm length of cut and a 90-degree included angle, so it fits standard ER collets and holders that accept that shank dimension.
How do I verify the AlTiN coating is performing correctly once the tool is installed?
Check for consistent chip colour and clean edge finish on the first test pass; AlTiN should run cooler and show gold-purple wear marks rather than blue oxidation.
Does the package include any collets, holders or mounting hardware, or must I source them separately?
Only the carbide engraving tool itself is supplied; collets, tool holders and any mounting hardware are sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
