Micro 100
Micro 100 RNCM-060-2 Engraving Tool 8.00 mm 90° Carbide
Carbide engraving tool with double-ended 90-degree tip and 8.00 mm length of cut
- 90° angle cuts precise V-grooves in one pass
- 00 mm cut length handles deep engraving tasks
- Solid carbide body resists wear on hard materials
- Uncoated surface keeps edges sharp for clean lines
- Metric specification matches standard workshop tooling
Engraving Tool for Carbide Machining
This Micro 100 RNCM-060-2 engraving tool is built for precision marking on hard materials. The solid carbide construction handles abrasive workloads while the 90 degree included angle produces clean, sharp grooves. It suits CNC operators and machinists who need consistent results on metal or plastic workpieces.
Verify Shank Fit and Machine Clearance
Confirm that your tool holder accepts the shank diameter before ordering. The 8.00 mm length of cut determines maximum engraving depth per pass so check your programme limits. Ensure the spindle can run uncoated carbide at the required speed without vibration.
Suited for Single-Point Engraving Tasks
This tool serves shops cutting identification marks, serial numbers or decorative lines in ferrous and non-ferrous stock. It is not for buyers who need multi-flute profiling, coated edges for high-heat alloys or a different included angle for wider grooves.
Highlights
- 90° angle cuts precise V-grooves in one pass
- 00 mm cut length handles deep engraving tasks
- Solid carbide body resists wear on hard materials
- Uncoated surface keeps edges sharp for clean lines
- Metric specification matches standard workshop tooling
Specifications
| Brand | MICRO 100 |
|---|
Questions about this item
What comes in the box with the RNCM-060-2 engraving tool and do I need to buy a holder separately?
The box contains the uncoated carbide engraving tool with an 8.00 mm length of cut and 90 degree included angle. A compatible tool holder is not included and must be purchased separately.
How do I choose between the different Micro 100 engraving tool versions for my application?
Select the RNCM-060-2 when you need a double-ended, 90 degree, uncoated carbide tool with an 8.00 mm cut length in metric sizing. Other models vary by angle, coating, shank diameter or cut length.
What does the 90 degree angle mean for the groove shape when the tool is running in my machine?
The 90 degree included angle cuts a symmetrical V-groove. The width of the groove at the surface will be approximately twice the cutting depth.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
