Micro 100
Micro 100 RNCM-060-1 Engraving Tool 8.00 mm Carbide 90 Degrees
8 mm carbide engraving tool cuts at a 90-degree angle for precise detailing
- 90-degree angle creates clean V-grooves in one pass
- 00 mm length of cut handles deep engraving tasks
- Carbide construction resists wear for extended tool life
- Uncoated surface suits a wide range of materials
- Micro 100 brand trusted by professional machinists
Engraving Tool for Precision Marking
The Micro 100 RNCM-060-1 is a single-flute engraving tool designed for detailed marking on metal and other hard materials. Its 90-degree carbide tip produces clean V-grooves and sharp character definition. It suits machinists, toolmakers and hobbyists who need repeatable results in CNC or manual engraving operations. The uncoated carbide construction resists wear during extended use.
8.00 mm Cutting Length and 90-Degree Angle
The tool provides an 8.00 mm length of cut, giving enough reach for shallow to medium-depth engraving passes. The fixed 90-degree included angle determines the groove geometry and limits the maximum width at a given depth. Carbide hardness maintains edge integrity in steel, aluminium and plastics, but the single-flute design restricts material removal rates compared to multi-flute cutters. Very deep or wide profiles will require multiple passes or a different tool form.
Metric Shank Fits Standard Holders
The metric shank fits directly into ER collets, Weldon flats or shrink-fit holders common on CNC routers and milling machines. No adapter bushings are needed when the machine spindle accepts the shank diameter. The uncoated surface avoids coating delamination in abrasive materials, though it offers less lubricity than coated alternatives in high-speed runs. The tool frees up tool-changer slots by covering a range of lettering and ornamental tasks with a single geometry.
Highlights
- 90-degree angle creates clean V-grooves in one pass
- 00 mm length of cut handles deep engraving tasks
- Carbide construction resists wear for extended tool life
- Uncoated surface suits a wide range of materials
- Micro 100 brand trusted by professional machinists
Specifications
| Brand | MICRO 100 |
|---|
Questions about this item
Will the 8.00 mm length of cut on this RNCM-060-1 engraving tool work with my existing 8 mm tool holders?
The tool has an 8.00 mm length of cut and a 90 degree carbide tip; match the shank diameter of your holder to the tool specification for proper fit.
How can I verify the 90 degree carbide tip is cutting correctly after installation?
Check for clean, consistent V-grooves with a 90 degree included angle and minimal burrs on the workpiece after a test pass.
Does the box contain only the single uncoated carbide engraving tool or are collets and holders included?
The package contains one single 90 degree carbide engraving tool; collets, holders or coatings are not included and must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
