Micro 100
Micro 100 RNC-125-23 Engraving Tool 3/8" Carbide
Carbide engraving tool with 3/8 inch length of cut and 90-degree included angle
- Double-ended 90° carbide tip engraves two ways
- 3/8 inch length of cut reaches deeper detail
- Uncoated carbide resists wear on hard materials
- Micro 100 brand trusted by precision machinists
- Inch-based 0.004 tip suits fine engraving work
Micro 100 Engraving Tool
The Micro 100 RNC-125-23 is a double-ended carbide engraving tool with a 90-degree included angle and a 3/8 inch length of cut. It is designed for machinists and fabricators who need precise marking or detailing on metal workpieces. The uncoated carbide construction provides hardness for clean lines in ferrous and non-ferrous materials.
Check Shank Compatibility
Verify that your engraving holder or tool post accepts the shank style implied by the RNC-125-23 designation before ordering. Confirm the 3/8 inch length of cut suits the reach required for your specific fixture or part geometry. Ensure your machine setup can accommodate a double-ended tool without clearance issues during operation.
Replaces Worn Carbide Engravers
This tool replaces dull or chipped carbide engraving bits that no longer produce sharp 90-degree marks. The jump is worth it when existing tips require frequent resharpening or when uncoated carbide is preferred for specific material interactions. It is not for operators needing coated tips for high-temperature alloys or single-ended tools for restricted access.
Highlights
- Double-ended 90° carbide tip engraves two ways
- 3/8 inch length of cut reaches deeper detail
- Uncoated carbide resists wear on hard materials
- Micro 100 brand trusted by precision machinists
- Inch-based 0.004 tip suits fine engraving work
Specifications
| Brand | MICRO 100 |
|---|
Questions about this item
Does the Micro 100 RNC-125-23 engraving tool arrive ready to use or are additional holders required?
The tool is a complete double-ended 90-degree carbide engraving insert with a 3/8 inch length of cut; no separate holders are mentioned in the specifications.
How do I decide between the RNC-125-23 and other Micro 100 engraving tools?
This model is defined by its double-ended 90-degree carbide design, .004 inch tip radius and 3/8 inch cutting length; choose it when those exact geometry figures match the engraving detail you need.
What does the .004 inch tip radius mean for actual engraving work?
A .004 inch tip radius produces very fine lines and sharp 90-degree corners, suited to detailed marking on metal or plastic with the 3/8 inch cutting depth.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
