Micro 100
Micro 100 MEF-125-1000-005 Corner Radius End Mill
Corner radius end mill with 1/8 inch milling diameter, carbide construction, bright uncoated finish, straight shank, 0.005 inch radius, 2 inch overall length
- TypeCutting Tools
- Uncoated carbide resists built-up edge on aluminium
- 005 in corner radius adds strength to sharp corners
- 1/8 in diameter suits fine detail milling
- 2 in overall length fits standard tool holders
- Carbide substrate extends tool life in abrasive materials
Micro 100 Corner Radius End Mill
This Micro 100 corner radius end mill is a carbide cutting tool designed for milling operations that require a small radius on the workpiece corner. It suits machinists and fabricators working with fractional inch dimensions who need an uncoated, bright finish tool for general purpose milling tasks.
Check shank and diameter compatibility
Verify that your tool holder accepts a 1/8 in shank and that your machine setup can accommodate a 1/8 in milling diameter before ordering. The overall length is 2 in and the corner radius measures 0.005 in, so confirm these dimensions match your specific application requirements and available clearance.
Uncoated carbide thermals and power
The bright uncoated carbide substrate runs hotter than coated alternatives during sustained cuts, so plan for appropriate coolant or air blast to manage heat buildup. Cutting forces remain moderate with the small 1/8 in diameter, resulting in lower spindle power draw and reduced vibration compared to larger tooling in the same material.
Highlights
- Uncoated carbide resists built-up edge on aluminium
- 005 in corner radius adds strength to sharp corners
- 1/8 in diameter suits fine detail milling
- 2 in overall length fits standard tool holders
- Carbide substrate extends tool life in abrasive materials
Specifications
| Brand | MICRO 100 |
|---|---|
| Type | Cutting Tools |
Questions about this item
Does the Micro 100 MEF-125-1000-005 end mill ship with any holder, collet or coating kit, or must those be purchased separately?
The tool is supplied as a single uncoated carbide end mill with a 0.005 in corner radius; no holder, collet or additional coating is included and must be sourced separately.
How do I decide between the available corner-radius options for this 1/8 in diameter end mill?
Choose the 0.005 in radius when a very small fillet is required for finishing passes; larger radii (if offered) would leave a bigger corner blend and reduce tool stress.
What does the 2 in overall length mean for reach and rigidity inside a CNC machine?
A 2 in overall length gives a short, rigid projection from the holder, limiting deflection and allowing the 1/8 in carbide cutter to maintain accuracy in shallow pockets.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
