We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black PLA+ filament spool, 1.75mm diameter, 1kg weight, matte finish

Miailuy PLA+ Filament 1.75mm Black 1kg +/-0.02mm

SKU CH-ZKKZ-DV07R

PLA+ filament with 1.75mm diameter and +/- .02mm accuracy for consistent extrusion on most FDM printers

  • ColorBlack
  • MaterialPolylactic Acid
  • Diameter5.6
  • Weight2.75 pounds
  • Reliable prints from strong layer adhesion and reduced clogs
  • Consistent extrusion with 1.75 mm diameter at +/- .02 mm accuracy
  • Smooth workflow from near 100 % neat winding that prevents tangles
  • Broad printer fit with standard 2.2 inch centre hole on 8 inch spool
  • Easy printing at 200 to 220 °C nozzle and 0 to 60 °C bed

Miailuy PLA+ 1.75 mm Filament

This black PLA+ filament comes on a 1 kg spool with a tight diameter tolerance of +/- .02 mm. It is designed for reliable feeding on most FDM 3D printers and suits both beginners and experienced makers who need consistent extrusion for everyday projects.

Thermals and Printing Behaviour

Recommended nozzle temperature ranges from 200 to 220 °C with a heated bed between 0 and 60 °C. Printing speeds of 50 to 90 mm/s deliver strong layer adhesion while the material’s low warping helps prints stick to various build surfaces without extra adhesives.

Spool Design and Compatibility

The 8-inch diameter spool has a standard 2.2-inch centre hole that fits common printer holders. A neat winding process minimises tangles and jams, and the filament works with popular machines such as Creality Ender 3, Anycubic and Prusa models.

Highlights

  • Reliable prints from strong layer adhesion and reduced clogs
  • Consistent extrusion with 1.75 mm diameter at +/- .02 mm accuracy
  • Smooth workflow from near 100 % neat winding that prevents tangles
  • Broad printer fit with standard 2.2 inch centre hole on 8 inch spool
  • Easy printing at 200 to 220 °C nozzle and 0 to 60 °C bed

Specifications

BrandMiailuy
ColorBlack
MaterialPolylactic Acid
Diameter5.6
Weight2.75 pounds

Questions about this item

How do I load the 1.75 mm PLA+ spool on my printer without tangles?

Place the 1 kg spool on the holder so filament unwinds counter-clockwise, thread the end through the guide tube, and keep tension while the extruder pulls; the neat winding gives a near 100 % tangle-free feed

When should I dry or replace this filament?

If prints show popping, stringing, or weak layer adhesion, bake the spool at 50 °C for several hours; replace when diameter drifts beyond the 1.75 mm ± .02 mm spec

What is the first limit I hit on long prints with the recommended 200–220 °C nozzle and 0–60 °C bed?

Heat creep in the hot-end often appears before warping, especially above 90 mm/s print speed, so keep cooling fan active and stay within the 50–90 mm/s window

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.