We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three small round aluminum LED lights with 1.5m USB cable

MH001 LED Lamp Kit 001 3PCS 125VAC 1.5m USB 3000K 4000K 6000K

SKU CH-97A5-WD0ZA MPN MH001

Three-piece LED lamp kit with 3000K, 4000K and 6000K colour temperatures, power-off memory and 1.5 m USB cable

  • Housing ColorThree Colors 3PCS
  • Housing MaterialAluminum
  • Size/Dimensions1 in x 1 in x 1 in
  • Compatibility/FitmentBMH5110140A
  • Voltage125VAC
  • FeaturesLight Emitting Diode
  • Three adjustable colour temperatures for project ambience
  • Power-off memory retains last brightness and colour setting
  • 5 m USB cable allows flexible shelf or cabinet placement
  • 999 free lamp designs available on MakerWorld for DIY printing
  • Aluminium housing in three colours suits Bambu Lab MH001 printers

Official Bambu Lab LED Lamp Kit 001

The MH001 kit provides three round LED modules designed for Bambu Lab 3D printers. Each aluminium housing contains a dimmable diode that operates from a standard USB 5 V supply. The kit is sold new and includes three units in a single package.

Makers printing lithophanes or light boxes

Builders who need wireless app control or RGB colour mixing should look at other kits. The hardware only stores the last used white temperature and brightness level after power loss.

Three selectable colour temperatures

Users choose between 3000 K warm, 4000 K neutral and 6000 K cool white. A 1.5 m USB cable and power-off memory chip are included. Over 999 free models are available on MakerWorld for this kit.

Highlights

  • Three adjustable colour temperatures for project ambience
  • Power-off memory retains last brightness and colour setting
  • 5 m USB cable allows flexible shelf or cabinet placement
  • 999 free lamp designs available on MakerWorld for DIY printing
  • Aluminium housing in three colours suits Bambu Lab MH001 printers

Specifications

BrandBambooSegD
Housing ColorThree Colors 3PCS
Housing MaterialAluminum
Size/Dimensions1 in x 1 in x 1 in
Compatibility/FitmentBMH5110140A
Voltage125VAC
FeaturesLight Emitting Diode
ModelBMH5110140A
Part NumberBMH5110140A

Questions about this item

How do I install the MH001 LED lamp kit and what step is often missed?

Connect the USB cable to a 5 V source, mount the three aluminum housings in your 3D-printed lamp design, then press the controller to cycle through 3000K, 4000K and 6000K; the step often missed is allowing the power-off memory chip to save your last setting before first unplugging.

What maintenance or replacement will the MH001 kit need later?

The LED modules are sealed in aluminum housings and require no bulb changes; only the USB cable or controller may need replacement if physically damaged after extended use.

What limit appears first when the MH001 kit runs continuously?

Sustained operation is limited by the 125 VAC rating of the supplied power adapter; exceeding that voltage will trigger protection before the LEDs reach thermal limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.