We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black electronic module with multiple wire connectors and a Micro-B USB port

METRA

METRA AXAC-FD1 Car Amplifier

SKU CH-C36Q-SZ3M5

Connects up to four cameras to compatible Ford vehicles from 2011 onward using CAN bus triggers and a pre-wired harness

  • TypeSignal Processors
  • Four camera inputs expand visibility
  • CAN bus reverse trigger activates automatically
  • CAN bus turn-signal trigger adds side views
  • Four programmable control wires customise each camera
  • Micro-B USB port enables firmware updates

Vehicle Camera Interface for Ford 2011-Up

The Metra Axxess AXAC-FD1 adds up to four camera inputs to select Ford vehicles from 2011 onward. It connects through the factory CAN bus to generate reverse and turn-signal triggers automatically. Models equipped with factory navigation are limited to front and rear camera inputs only. A separate supplemental harness is required for 2014-Up vehicles with a 4.2-inch display screen.

CAN Bus Triggering and USB Updates

Reverse and turn-signal triggers are produced by reading the vehicle CAN bus rather than by tapping individual wires. The interface draws power from the factory harness and operates within the vehicle’s 12 V electrical system. Firmware updates are applied through a Micro-B USB port using a separate update cable. No fan or active cooling is used in the module.

Pre-Wired Harness and Optional Extras

A pre-wired harness is included to simplify installation behind the factory display. Four programmable camera control wires let the installer set custom activation logic for each camera. The AXUSB-MCBL update cable and the AX-ADDCAM-FDSTK supplemental harness for 2014-Up models with a 4.2-inch screen are sold separately. The interface supports Ford Edge, Escape, Explorer, F-150, Super Duty, Focus, Fusion, Mustang, Transit, Transit Connect and Ranger across the listed model years.

Highlights

  • Four camera inputs expand visibility
  • CAN bus reverse trigger activates automatically
  • CAN bus turn-signal trigger adds side views
  • Four programmable control wires customise each camera
  • Micro-B USB port enables firmware updates

Specifications

TypeSignal Processors

Questions about this item

How do I install the AXAC-FD1 and what step is often missed?

Connect the pre-wired harness to the vehicle CAN bus, attach up to four cameras to the inputs, and flash the latest firmware via Micro-B USB before testing; skipping the USB update is the step most installers miss.

What maintenance or replacement will the AXAC-FD1 need later?

The only recurring task is firmware updates through the Micro-B USB port when new camera compatibility or CAN-bus fixes are released; no moving parts or consumable components require periodic replacement.

What limit appears first during sustained use of the AXAC-FD1?

The four-camera input maximum is the hard limit; models with navigation can only use front and rear inputs, reducing usable channels to two regardless of how many cameras are connected.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.