We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled translucent PTFE tubing, 1/8 inch OD, 100 foot length

MERCURY

MERCURY PTFE18ANA PTFE Tubing 1/8" OD .063 ID 100' Natural

SKU CH-VT9J-VW6MM

PTFE tubing with 1/8" OD and .063 ID supplied in a 100' roll for fluid transfer

  • ColorTransparent
  • PTFE construction resists chemicals and heat
  • 1/8 inch outer diameter fits standard fittings
  • 063 inch inner diameter allows precise flow control
  • 100 foot length provides ample material for projects
  • Natural transparent colour enables visual flow monitoring

PTFE Tubing 1/8" OD .063 ID

MERCURY PTFE18ANA is a 100-foot roll of PTFE tubing with a 1/8-inch outer diameter and a .063-inch inner diameter. The natural transparent colour lets you inspect flow visually. It suits fluid-transfer tasks that demand chemical resistance and low friction.

Practical limits of PTFE tubing

PTFE handles a broad temperature range and resists most solvents, yet it cold-flows under sustained clamp pressure and can kink if bent tighter than its natural radius. The .063-inch bore restricts volumetric flow, so long runs or viscous fluids need pressure planning. Fittings must match the 1/8-inch OD precisely to avoid leaks.

Replaces rubber or vinyl lines

This tubing upgrades from rubber or vinyl lines that degrade, swell or leach into aggressive chemicals. The jump is worth it when the fluid attacks ordinary polymers or when purity demands a non-stick bore that resists deposit build-up. It is not for installers who need a larger bore for high-volume transfer.

Highlights

  • PTFE construction resists chemicals and heat
  • 1/8 inch outer diameter fits standard fittings
  • 063 inch inner diameter allows precise flow control
  • 100 foot length provides ample material for projects
  • Natural transparent colour enables visual flow monitoring

Specifications

ColorTransparent
BrandMERCURY

Questions about this item

What length should I select for this PTFE tubing?

The tubing is supplied in a single 100 foot coil of 1/8 inch outside diameter.

How does the 0.063 inch inside diameter affect flow in a plumbing run?

The 0.063 inch bore sets the maximum fluid volume and pressure drop for each foot of installed line.

Which fitting standard matches the 1/8 inch outside diameter?

The 1/8 inch OD fits compression or push-to-connect fittings sized for 1/8 inch tubing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.