We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow PVC three-piece rainsuit with detachable hood, snap front, bib overall, nylon lining

MCR Safety

MCR Safety 3003M 3-Piece Rainsuit with Detachable Hood, PVC, 0.28 mil Thick, Personal Protective Equipment

SKU CH-EPHX-83MB6

A three-piece PVC rainsuit with detachable hood, nylon lining, snap closures and 0.28 mil thickness

  • Three-piece design covers jacket, bib overall and detachable hood for full-body rain protection
  • PVC shell at 0.28 mil thickness blocks wind-driven water while remaining lightweight
  • Nylon lining adds comfort and reduces clamminess during extended wear
  • Snap closures on jacket front and bib fly allow quick on and off over work clothes
  • Detachable hood with drawstring seals out rain without restricting head movement

3-Piece PVC Rainsuit for General Use

This three-piece rainsuit from MCR Safety includes a jacket, bib overall and detachable hood. The yellow PVC shell is 0.28 mil thick and carries a limited flammability rating. A nylon lining is included for comfort. It is sized M with a 30-inch jacket length and a 27-inch inseam.

Snap Closures and Detachable Hood

The jacket and bib overall fasten with snap closures for quick dressing. The hood attaches and removes via a drawstring system. Snaps can be operated with gloves, though they may loosen under heavy movement. PVC material stiffens in cold temperatures, which can make initial donning slower.

PVC Thickness and ANSI Status

At 0.28 mil the PVC provides light rain protection but is not suited for prolonged heavy downpour or abrasive work. The suit is not ANSI rated for high-visibility or chemical splash resistance. California Proposition 65 warnings apply for cancer and reproductive harm.

Highlights

  • Three-piece design covers jacket, bib overall and detachable hood for full-body rain protection
  • PVC shell at 0.28 mil thickness blocks wind-driven water while remaining lightweight
  • Nylon lining adds comfort and reduces clamminess during extended wear
  • Snap closures on jacket front and bib fly allow quick on and off over work clothes
  • Detachable hood with drawstring seals out rain without restricting head movement

Specifications

BrandMCR Safety

Questions about this item

How can I check the 3003M rainsuit is working as intended after putting it on?

Fasten the snap closures on the jacket and bib overall, then adjust the drawstring on the detachable hood; water should bead and run off the PVC surface without soaking through to the nylon lining.

What comes in the box with the 3003M and what must I buy separately?

The package includes the yellow PVC jacket, bib overall trousers and detachable hood with drawstring; no additional items are required for basic rain protection.

Which version of the 3003M should I choose for a medium fit?

Select the size marked M, which provides a 30 in jacket length and a 27 1/2 in inseam for a medium build.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.