We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of gray cowhide leather work gloves with safety cuffs and wing thumbs

MCR Safety

MCR Safety 1400KS leather gloves cowhide safety cuff wing thumb gray personal protective equipment

SKU CH-309D-KNDPQ

Cowhide leather work gloves with Kevlar stitching, safety cuff, wing thumb and ANSI/ISEA A3 cut resistance

  • ANSI/ISEA cut level A3 protects hands from sharp edges
  • Kevlar stitching and liner add heat resistance up to 500 °F
  • Premium cowhide leather palm resists abrasion during tough tasks
  • Wing thumb design improves grip and comfort for extended wear
  • Safety cuff allows quick removal and keeps debris out

MCR Safety 1400KS Cowhide Gloves

These leather gloves feature a safety cuff and wing thumb design for general work applications. The premium cowhide palm provides durability and grip in demanding environments. Sold as a pair, they meet ANSI/ISEA standards with an A3 cut-resistance rating. Kevlar stitching and liner add strength and heat protection.

Suited for general trade and handling tasks

Workers needing high cut resistance and conductive heat protection up to 500 Degrees F will find these appropriate. The wing thumb enhances comfort during repetitive gripping motions. Buyers requiring liquid chemical resistance or insulated cold-weather protection should look at alternative glove types. The product carries California Proposition 65 warnings for cancer and reproductive harm.

ANSI/ISEA A3 cut level with Kevlar liner

The decisive specification is the ANSI/ISEA A3 cut-resistance rating covering the full glove. Combined with a Kevlar liner and Kevlar stitching, this level determines suitability for moderate cut-hazard tasks. Conductive heat testing at Level 4 supports brief contact with hot surfaces below 500 Degrees F.

Highlights

  • ANSI/ISEA cut level A3 protects hands from sharp edges
  • Kevlar stitching and liner add heat resistance up to 500 °F
  • Premium cowhide leather palm resists abrasion during tough tasks
  • Wing thumb design improves grip and comfort for extended wear
  • Safety cuff allows quick removal and keeps debris out

Specifications

BrandMCR Safety

Questions about this item

How do I put on the MCR Safety 1400KS gloves so the Kevlar liner and wing thumb align correctly?

Slide each hand in so the wing thumb follows your natural thumb angle; the safety cuff should sit just past the wrist bone without rolling, and the Kevlar stitching must lie flat across the palm for full A3 cut coverage.

When should I replace the cowhide palm and Kevlar liner on these gloves?

Replace the pair once the leather palm shows thinning, cracking or embedded grit, or if the yellow Kevlar threads become visible through wear — both indicate the A3 cut resistance and Level 4 conductive heat rating are compromised.

At what temperature does the conductive heat protection of the 1400KS gloves reach its limit during continuous work?

The gloves are rated Level 4 for conductive heat up to 500 °F; sustained contact above that temperature will exceed the tested protection and can degrade the cowhide and Kevlar liner.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.