We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flexible 36 inch warm white LED strip with 54 diodes self adhesive backing

Maxxima

Maxxima MLS-3654WW-A 36" 54 LED Warm White Strip Lighting

SKU CH-V69G-P7NKB

A 36-inch self-adhesive LED strip with 54 warm-white diodes rated for 100,000 hours at 12.8 volts

  • Warm white glow for cosy ambience with 54 LEDs
  • Self-adhesive backing plus clips for quick mounting
  • 8 V operation suits low-voltage systems
  • 100,000-hour rated life reduces replacements
  • 1,110 mA draw keeps energy use low

Purpose & Fit

The Maxxima MLS-3654WW-A is a 36-inch warm-white LED strip designed for accent or auxiliary lighting in vehicles, boats or indoor spaces. Its 54 LEDs produce a consistent glow suited to under-cabinet, cove or toe-kick installations where a fixed length is acceptable.

Build & Connections

The flexible PVC and silicone body measures half an inch wide and deep, with a blunt-cut wire termination for direct wiring into a 12.8-volt system drawing 1110 mA. A self-adhesive back allows quick mounting on clean surfaces, while the included clips and screws provide a mechanical fallback for vibration-prone or vertical locations.

Accessories & Extras

Supplied mounting clips and screws let the installer secure the strip without relying solely on adhesive bond. No controller, dimmer or connector plugs are included, so the buyer must source switching and power distribution separately to complete the circuit.

Highlights

  • Warm white glow for cosy ambience with 54 LEDs
  • Self-adhesive backing plus clips for quick mounting
  • 8 V operation suits low-voltage systems
  • 100,000-hour rated life reduces replacements
  • 1,110 mA draw keeps energy use low

Specifications

BrandMAXXIMA

Questions about this item

What voltage does the 12.8 V LED strip require to operate?

The strip runs on a 12.8 volt supply and draws 1110 mA, so the power source must deliver at least that current at the rated voltage.

What surface area and clearance does the 36 inch strip need for the self-adhesive backing?

The 36 inch long, 1/2 inch wide strip with 1/2 inch diameter and 1/5 inch depth requires a clean, flat surface at least that size for the adhesive to bond securely.

How are the blunt-cut wires connected during installation, and what mistake should be avoided?

The blunt-cut wires must be stripped and joined to a 12.8 V supply with correct polarity; reversing positive and negative is the common error that prevents the 54 LEDs from lighting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.