Maxxima
Maxxima M42363RYCL-A Contactor Amber/Red 12.8V
Square exterior light with amber/red split lens runs on 12.8 V DC drawing 460 mA and 80 mA
- Amber/red split lens gives two signals from one housing
- 8 V DC operation suits standard vehicle electrical systems
- Low 80 mA park-turn draw reduces battery load
- 460 mA stop-tail-turn output meets brightness needs
- ABS base with polycarbonate housing resists vibration and weather
Square Exterior Light for 12.8 V DC Systems
The Maxxima M42363RYCL-A is a square exterior light designed for 12.8 V DC vehicle electrical systems. It combines a red stop tail turn function on one side with an amber park turn function on the other for the right hand side of the vehicle. The unit draws 460 mA and 80 mA depending on the active circuit. Its housing is silver polycarbonate with an ABS plastic base.
Dual Colour Lens with Red STT and Amber Park Turn
The single specification that decides fitment is the lens configuration: red STT on one side and amber park turn on the other for right hand side mounting. The lens colours are amber and red polycarbonate. This specific split function and orientation must match the vehicle's lighting requirements and mounting location.
Polycarbonate Housing
The polycarbonate housing and ABS plastic base provide the structural mounting platform for exterior installation. The silver housing colour is part of the assembled unit. No separate brackets, wiring harnesses or control modules are included in the supplier data.
Highlights
- Amber/red split lens gives two signals from one housing
- 8 V DC operation suits standard vehicle electrical systems
- Low 80 mA park-turn draw reduces battery load
- 460 mA stop-tail-turn output meets brightness needs
- ABS base with polycarbonate housing resists vibration and weather
Specifications
| Brand | Maxxima |
|---|
Questions about this item
What does the 460 mA current draw mean once the unit is installed?
The 460 mA figure represents the peak draw when the stop, tail and turn functions are active on the red side of the lamp.
How does the 12.8 V DC rating limit what vehicles can use this light?
It is designed for standard 12 V vehicle electrical systems; the 12.8 V rating matches typical charging voltage so it operates within normal automotive ranges.
What mounting clearance does the 4-1/2 inch square housing need?
The housing measures 4-1/2 inches wide by 4-1/2 inches high, so a square cut-out or bracket with at least that much clear space is required.
More in Electrical Starters & Contactors
Similar items
Same shelf, same checkout — eight coins and a 30-minute rate lock.





