We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular LED clearance marker light, clear and red lens, white housing, surface mount with tape

Maxxima

Maxxima M20341RCL Clearance Marker Light traffic safety equipment

SKU CH-33N4-4P7ES

Surface-mount LED clearance marker light with IP67 rating and SAE J592E compliance

  • ColorSmooth Reflective White; Back and End Panels: White
  • LED clearance light meets SAE J592E P2 PC standards
  • IP67 rating protects against dust and water ingress
  • Low 100 mA draw reduces electrical load
  • Polycarbonate housing resists impact and UV exposure
  • Mounting tape included for quick permanent installation

Maxxima M20341RCL Clearance Marker Light

The Maxxima M20341RCL is a rectangular LED clearance marker light designed for vehicle classes one through eight. It features a smooth reflective white finish with white back and end panels, plus clear and red lens colours. The polycarbonate housing carries an IP67 rating and meets SAE J592E standards with SAE lens codes P2 and PC. This new light draws 100 mA and suits permanent surface mounting on trucks, trailers and commercial fleets.

Surface mount with hole panel and included tape

Installation uses a hole-panel mount style secured by the supplied mounting tape for a permanent fit. The electrical connection is a lead connector that wires into the existing vehicle circuit. The low 100 mA draw reduces load on the electrical system. The IP67-rated polycarbonate housing resists water and dust ingress when the tape seal is applied cleanly. Ensure the mounting surface is flat and degreased before pressing the light into place to avoid moisture entry.

Verify voltage, vehicle class and mounting space

Confirm the vehicle operates on a compatible low-voltage circuit that can supply the 100 mA current draw. Check that the vehicle class falls within the supported range of class one to class eight. Measure the available mounting area to accommodate the rectangular shape and hole-panel fixing centres. No additional hardware is included beyond the mounting tape, so ensure the lead connector matches the existing wiring harness.

Highlights

  • LED clearance light meets SAE J592E P2 PC standards
  • IP67 rating protects against dust and water ingress
  • Low 100 mA draw reduces electrical load
  • Polycarbonate housing resists impact and UV exposure
  • Mounting tape included for quick permanent installation

Specifications

ColorSmooth Reflective White; Back and End Panels: White
BrandMAXXIMA

Questions about this item

How can I verify the Maxxima M20341RCL clearance marker light is working correctly after installation?

Apply power and confirm the LED emits a steady red glow through the clear lens; the SAE J592E P2 PC code and IP67 rating mean the sealed polycarbonate housing should show no moisture ingress or flicker at the rated 100 mA draw.

What comes with the Maxxima M20341RCL and what must I source separately?

The light includes mounting tape for permanent surface attachment via the hole-mount panel; a 12 V power source and lead-connector wiring to deliver 100 mA are not included and must be supplied by the installer.

Which version of the Maxxima clearance marker light should I choose for my vehicle class?

This single M20341RCL model covers vehicle classes 1 through 8 and meets FMVSS J592e P2 PC requirements, so no alternative version or capacity needs to be selected.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.