Dayton 13E670 AC line switch kit for models 13E650 13E651 13E654 13E655
- 5.100
- Building Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Maxxima
Two-pin 18 AWG LED connector with 6 in PVC leads, 14 V DC rated, black and white
This 18 AWG two-pin connector ships in a six-inch length and is rated for 14V DC circuits. It provides a single connection point for LED light strips or modules in automotive and industrial installations. The PVC insulation covers both black and white conductors for polarity identification. Builders wiring auxiliary lighting will find the short lead convenient for tight routing.
Each unit arrives with the wires already terminated in a 2-pin housing, so no crimping or soldering is required on site. The 18 AWG conductors handle the current demands of typical LED loads at the rated voltage. The black and white colour coding speeds up polarity checks during installation. Installers can plug directly into compatible LED fixtures without extra tooling.
The six-inch overall length restricts how far the connector can reach between the power source and the light module. Builders who need longer runs must splice additional wire or source a different harness. The 18 AWG gauge sets a practical ceiling on current capacity for the voltage rating given. Users planning high-density arrays should verify the ampacity before committing to this lead.
| Brand | MAXXIMA |
|---|---|
| Type | Electrical Connectors |
The 18 AWG wires use PVC insulation rated for 14V DC LED circuits; inspect periodically for cracking or discolouration and replace if the jacket becomes brittle.
The 18 AWG conductor cross-section sets the current ceiling; sustained loads near its ampacity will heat the PVC insulation before the connector body itself becomes the bottleneck.
The connector has no moving parts so it is silent; heat rise depends on the actual LED current draw through the 18 AWG wires at 14V DC.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?