We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Maxim

Maxim 288450 WC Welded Hydraulic Cylinder 3.5 Bore 30 Stroke 1.75 Rod

SKU CH-TG1B-8M7QK

Double-acting welded hydraulic cylinder with 3.5 in bore, 30 in stroke and 1.75 in rod rated to 3,000 psi

  • 5 in bore delivers high-force output
  • 30 in stroke provides long linear travel
  • 75 in rod resists bending under load
  • Double-acting design powers both extend and retract
  • 3,000 psi rating handles demanding hydraulic systems

Application Fit

The Maxim 288450 welded cylinder suits machines that need a 3.5 inch bore and a 30 inch stroke for linear force. It fits hydraulic circuits that run up to 3,000 psi and accept #8 SAE ports. Builders who need a shorter stroke, a smaller bore diameter or a different rod size should select another model.

Deciding Specification

The 30 inch stroke fixes the travel distance between the 40 1/4 inch retracted length and the 70 1/4 inch extended length. That dimension decides whether the cylinder fits the available mounting space.

Highlights

  • 5 in bore delivers high-force output
  • 30 in stroke provides long linear travel
  • 75 in rod resists bending under load
  • Double-acting design powers both extend and retract
  • 3,000 psi rating handles demanding hydraulic systems

Specifications

BrandMAXIM

Questions about this item

How much heat does the 3.5 in bore cylinder generate when running all day at 3,000 psi?

The welded cylinder converts hydraulic pressure into linear force; heat comes from the power unit and fluid friction, not the cylinder itself. Proper fluid cooling keeps temperatures stable.

What hydraulic fittings and pins must I already have to install the #8 SAE ports and 1 in pin holes?

You need #8 SAE male adapters or hoses for the two ports, plus two 1 in diameter pins and matching clips to secure the cylinder ends.

Will the 70 1/4 in extended length and 1.75 in rod fit the mounting points on my older 3.5 in bore equipment?

The cylinder has a 40 1/4 in retracted length, 30 in stroke, 1.75 in rod and 1 in pin holes; match those centres and pin sizes to your existing brackets.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.