Maxim
Maxim 218313 TC Tie-rod Hydraulic Cylinder 2 Bore 30 Stroke 1.125 Rod
Tie-rod hydraulic cylinder with a 2 in bore, 30 in stroke and 1.125 in rod rated to 2,500 psi
- 2 in bore delivers strong linear force
- 30 in stroke provides long travel range
- 125 in rod resists bending under load
- 2500 psi rating handles demanding hydraulic systems
- 20 to 220 °F range suits harsh environments
Hydraulic cylinder for linear motion
The Maxim 218313 TC tie-rod cylinder provides 30 in of stroke with a 2 in bore and 1.125 in rod. It suits industrial machinery that requires reliable push or pull force at up to 2500 psi. The ductile iron piston and honed steel tube handle continuous cycling in automation, pressing or material-handling equipment.
Verify mounting and fluid compatibility
Check that your system supplies a 3/8 in NPT port connection and can accommodate the 40 1/4 in retracted or 70 1/4 in extended length. Confirm the hydraulic fluid operates within the -20 to 220 degrees F range and that the 1 in pin diameter matches your clevis or bracket. Ensure the maximum pressure rating meets the circuit design pressure.
Thermal and pressure limits in service
The cylinder is rated for continuous operation between -20 and 220 degrees F without external cooling. At the 2500 psi limit the tie-rod construction and high-tensile rods maintain structural integrity while the honed tube minimises internal leakage. Standard hydraulic fluid viscosity in this temperature band keeps friction low and prevents excessive heat build-up during normal cycling.
Highlights
- 2 in bore delivers strong linear force
- 30 in stroke provides long travel range
- 125 in rod resists bending under load
- 2500 psi rating handles demanding hydraulic systems
- 20 to 220 °F range suits harsh environments
Specifications
| Brand | MAXIM |
|---|
Questions about this item
What comes in the box with the 218313 cylinder and what must I source separately?
The cylinder includes pins and clips with a 1 in pin diameter; hydraulic fluid, hoses, fittings and mounting hardware are not included.
How do I decide between the 2 in bore, 30 in stroke and 1.125 in rod for my application?
Choose the 2 in bore for force at 2,500 psi, the 30 in stroke for required travel, and the 1.125 in rod for side-load resistance.
What does the 2,500 psi maximum pressure mean when the cylinder is installed in a machine?
It is the highest safe operating pressure; system relief valves must be set at or below 2,500 psi to avoid seal damage or tube failure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
