Maudlin Products
Maudlin Products Slotted Shim H-8 8" x 8" 0.010" Pk20
Stainless-steel slotted shims, 8 × 8 inches and 0.010 inch thick, pack of 20 for precise spacing
- TypeShims and Shim Stock
- SizeH-8"x8"
- Precision spacing with 0.010 in stainless steel shims
- Slotted 2-1/2 in width fits bolts without removal
- Tight +/-0.001 in thickness tolerance ensures accuracy
- 20-piece pack covers multiple alignment jobs
- 18-8 stainless resists corrosion in harsh environments
Slotted Shim Pack for Precision Spacing
This pack contains twenty untabbed stainless steel shims sized H-8 at eight inches by eight inches. Each shim is 0.010 inches thick with a 2 1/2 inch slot width and six inch slot depth. The 18-8 grade material suits general industrial spacing and alignment tasks. Buyers needing tabbed shims or different thicknesses should look elsewhere.
Full Hard Temper Holds Shape Under Load
The stainless steel is supplied in a full hard temper so the shims resist permanent deformation when clamped between machine feet, motor bases or structural members. Thickness tolerance is held to +/- 0.001 inches and length and width tolerances are +/- 0.015 inches. This consistency helps maintain even load distribution across multiple shim layers during sustained compression.
Verify Slot Geometry and Material Compatibility
Check that the 2 1/2 inch slot width and six inch slot depth match the bolt pattern or mounting hardware on your equipment. Confirm that 18-8 stainless steel is acceptable for the operating environment, especially where chloride exposure or specific galvanic coupling may be a concern. The plain finish has no coating to alter fit.
Highlights
- Precision spacing with 0.010 in stainless steel shims
- Slotted 2-1/2 in width fits bolts without removal
- Tight +/-0.001 in thickness tolerance ensures accuracy
- 20-piece pack covers multiple alignment jobs
- 18-8 stainless resists corrosion in harsh environments
Specifications
| Brand | MAUDLIN PRODUCTS |
|---|---|
| Type | Shims and Shim Stock |
| Size | H-8"x8" |
Questions about this item
Does the 18-8 stainless steel shim generate heat or noise when used continuously in machinery?
The 18-8 stainless steel material is passive and produces no heat or noise during operation.
What bolt size fits the 2 1/2 in slot width on these H-8 shims?
The 2 1/2 in slot width accommodates Trade Size H hardware, typically fitting bolts up to approximately 2 inches in diameter.
Will the .010 in thickness and +/- .001 in tolerance align with older shim stacks?
The .010 in thickness with +/- .001 in tolerance provides precise spacing compatible with existing shim sets requiring that dimension.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
