Maudlin Products
Maudlin Products Slotted Shim C-4 4" 0.125" Pk5 hand tool
Stainless-steel slotted shim pack, 4 inch by 4 inch by 0.125 inch, five pieces for precise spacing
- TypeAngle, Pitch & Slope Locators
- Precise alignment with ±0.003 in thickness tolerance
- Consistent fit ensured by ±0.015 in length and width tolerances
- Corrosion-resistant 18-8 stainless steel construction
- Soft annealed temper allows easy shaping and adjustment
- Five-piece pack supplies multiple shims for various spacing tasks
Slotted Shim C-4 for Precision Spacing
This pack supplies five stainless-steel shims cut to trade size C-4 for alignment and spacing tasks. Each piece measures four inches square and 0.125 inch thick with a 1-1/4-inch slot and 2-3/4-inch slot depth. The soft-annealed 18-8 alloy bends easily without cracking during fitment.
Capacity and Headroom
Thickness tolerance of +/- .003 inch and length and width tolerances of +/- .015 inch keep stacks predictable across multiple shims. The tab height of 3/4 inch and tab width of 2-1/4 inch give a secure grip for insertion and removal. Five pieces cover typical multi-point levelling jobs on machinery feet or structural connections.
Trade Size C-4 Compatibility
These shims fit only applications specified for trade size C-4 with matching slot dimensions. Builders needing different slot widths, thicknesses or material grades must select another part. The plain finish offers no corrosion coating beyond the base stainless alloy.
Highlights
- Precise alignment with ±0.003 in thickness tolerance
- Consistent fit ensured by ±0.015 in length and width tolerances
- Corrosion-resistant 18-8 stainless steel construction
- Soft annealed temper allows easy shaping and adjustment
- Five-piece pack supplies multiple shims for various spacing tasks
Specifications
| Brand | Maudlin Products |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Questions about this item
Will these C-4 shims fit the 1 1/4 in slots on my existing equipment?
Each shim has a 1 1/4 in slot width and 2 3/4 in slot depth, so they match the same tabbed profile used on standard C-size hardware.
How can I verify the shims meet the stated thickness after unpacking?
The thickness tolerance is +/- 0.003 in; measure each piece with a calibrated micrometer to confirm it reads 0.125 in within that range.
Are fasteners or adhesive included in the pack of five?
The pack contains only the five stainless-steel shims; any bolts, screws or adhesive required for installation must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
