Maudlin Products
Maudlin Products MSC4-CK Slotted Shim Assortment C-4 X 4 in Stainless Steel hand tool
Stainless-steel shim assortment provides 15 thicknesses from 0.001 in to 0.125 in with 1 1/4 in slots for precise alignment
- TypeAngle, Pitch & Slope Locators
- Precise alignment with 18 stainless shim thicknesses
- Corrosion-resistant 18-8 stainless steel for lasting accuracy
- Tabbed slots allow quick changes without disassembly
- Tight thickness tolerances down to .001 in for exact fits
- Compact 4 x 4 in kit covers .001 to .125 in
Slotted Shim Assortment C-4
The Maudlin Products MSC4-CK assortment supplies a range of stainless-steel shims for precise alignment tasks. Each piece measures 4 inches by 4 inches with a 1 1/4 inch slot width and 2 3/4 inch slot depth. Tabs are 3/4 inch high and 2 1/4 inches wide for easy handling. The set covers thicknesses from 0.001 in up to 0.125 in.
Replaces Mixed Thickness Packs
Technicians who previously gathered individual shims from multiple sources can now pull a single organised kit. The jump is worth it when alignment work demands consistent material grade and tight thickness tolerances across many shim sizes. Stainless steel 18-8 resists corrosion better than plain carbon steel alternatives.
Suits Precision Alignment Work
Maintenance crews aligning motors, pumps or gearboxes will appreciate the graded thickness range and tabbed design. Builders who need non-metallic shims or thicknesses outside the 0.001 in to 0.125 in span should look at something else.
Highlights
- Precise alignment with 18 stainless shim thicknesses
- Corrosion-resistant 18-8 stainless steel for lasting accuracy
- Tabbed slots allow quick changes without disassembly
- Tight thickness tolerances down to .001 in for exact fits
- Compact 4 x 4 in kit covers .001 to .125 in
Specifications
| Brand | Maudlin Products |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Questions about this item
What slot width and depth do the C-size 4-inch stainless shims need to slide onto?
The shims have a 1 1/4-inch slot width and a 2 3/4-inch slot depth, so they fit over bolts or studs with matching clearance.
How do you install these tabbed shims without bending the 3/4-inch tab?
Slide the slotted shim over the fastener, align the tab for grip, then tighten; the common error is prying the tab after tightening, which deforms the 18-8 stainless.
Which thickness shims from the 0.001-inch to 0.125-inch range wear or corrode first in a marine environment?
The thinnest 0.001-inch and 0.002-inch shims lose material fastest; 18-8 stainless resists corrosion but thin sections erode quicker under vibration and salt spray.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
