Maudlin Products
Maudlin Products MSB3-FK Slotted Shim Assortment B-3 X 3" Stainless Steel hand tool
A stainless-steel slotted shim assortment with eighteen thicknesses from 0.001 to 0.125 inch for precise alignment
- TypeAngle, Pitch & Slope Locators
- Precise alignment with 18 thickness options from .001 to .125 in
- Stainless steel 18-8 resists corrosion in harsh environments
- Slotted tab design allows quick insertion without disassembly
- Trade size B fits standard 3 in x 3 in mounting patterns
- Tight tolerances ensure repeatable spacing for critical assemblies
Slotted Shim Assortment B-3 X 3
This slotted shim assortment from Maudlin Products provides a range of precision stainless-steel shims for alignment and spacing tasks. It is intended for mechanics, machinists and maintenance technicians who need to adjust clearances on equipment or fixtures. The tabbed design allows quick insertion and removal during setup or repair work.
Thickness range 0.001 in to 0.125 in
The set includes individual shims in thicknesses of 0.001 in, 0.002 in, 0.003 in, 0.004 in, 0.005 in, 0.01 in, 0.015 in, 0.02 in, 0.025 in, 0.05 in, 0.075 in, 0.1 in and 0.125 in. Selecting the correct thickness from this range is the single factor that determines whether the shim will achieve the required fit. Buyers who need thicknesses outside this range or non-tabbed shims will not be served by this assortment.
18-8 stainless steel with plain finish
The shims are made from 18-8 grade stainless steel with a plain finish, giving corrosion resistance in damp or outdoor environments without additional coatings. The slot width is 7/8 in, slot depth 2 1/8 in, tab height 5/8 in and tab width 1 1/2 in. Thickness tolerance is +0.001/+0.125 in while length and width tolerances are +/-0.015 in. No lubricants, storage cases or certification documents are included.
Highlights
- Precise alignment with 18 thickness options from .001 to .125 in
- Stainless steel 18-8 resists corrosion in harsh environments
- Slotted tab design allows quick insertion without disassembly
- Trade size B fits standard 3 in x 3 in mounting patterns
- Tight tolerances ensure repeatable spacing for critical assemblies
Specifications
| Brand | Maudlin Products |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Questions about this item
How thin is the finest shim in this assortment and what tolerance should I expect when setting a precise gap?
The thinnest shim is .001 in thick with a tolerance of +.001/+ .125 in, so the actual thickness can be slightly above the nominal value.
What does the 7/8 in slot width mean for the bolts or studs I can use with these shims?
The 7/8 in slot clears fasteners up to that diameter, letting you slide the shim onto bolts or studs without removing them.
Will the 3 in by 3 in overall size and 5/8 in tab height fit inside my machine's adjustment pocket?
Each shim measures 3 in by 3 in overall with a 5/8 in tab height and 1 1/2 in tab width, so check your pocket against those dimensions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
