Maudlin Products
Maudlin Products MSA2-CK Slotted Shim Assortment 130 pcs hand tool
A 130-piece slotted stainless-steel shim kit covers thicknesses from 0.001 in to 0.125 in for precise alignment tasks
- TypeAngle, Pitch & Slope Locators
- 130 shims cover common alignment tasks
- Stainless 18-8 resists corrosion in harsh environments
- Slotted tabs allow quick placement without disassembly
- Thickness range .001 to .125 in fits precise gaps
- Tight tolerances ensure repeatable machine setups
130-piece slotted shim assortment
This Maudlin Products kit supplies 130 stainless-steel shims in trade size A, each measuring 2 in by 2 in with a 5/8 in slot. Thicknesses range from .001 in to .125 in across seventeen increments for precise alignment tasks. The plain 18-8 finish resists corrosion in workshop environments.
Mechanics needing fine adjustment increments
Technicians who require a broad range of thin shims for machinery alignment will find the .001 in to .125 in spread useful. Builders looking for thicker shim stock or non-slotted formats should look elsewhere because this assortment only covers the listed thicknesses in tabbed form.
Simple hand placement with tabbed design
Each shim includes a 1/2 in tab that allows quick insertion and removal without tools. The 1 9/32 in slot depth fits standard anchor bolts, but the fixed slot width means the kit cannot accommodate larger bolt diameters. Thickness tolerance of +.001/+.125 in and dimensional tolerance of +/- .015 in should be verified against critical specifications.
Highlights
- 130 shims cover common alignment tasks
- Stainless 18-8 resists corrosion in harsh environments
- Slotted tabs allow quick placement without disassembly
- Thickness range .001 to .125 in fits precise gaps
- Tight tolerances ensure repeatable machine setups
Specifications
| Brand | Maudlin Products |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Questions about this item
What bolt diameter do the 5/8 in slots on these shims fit?
The 5/8 in slot width fits bolts or studs up to 5/8 in diameter, allowing the tabbed shims to slide around anchor bolts or machine feet without full disassembly.
Will the 2 in by 2 in footprint and tab height work with existing motor mounts that use 1/2 in tabs?
Yes, each shim is 2 in long by 2 in wide with a 1/2 in tab height, matching common motor-mount slot patterns that accept 1 in wide tabs.
How can I verify the assortment contains all 130 pieces in the stated thicknesses after opening the kit?
Count the shims; the kit should hold 130 total pieces distributed across the 13 thicknesses from 0.001 in to 0.125 in, all marked with thickness on the tab.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
