Maudlin Products
Maudlin Products H-8 Slotted Shim 8" x 8" x 0.002" Pk20
Pack of twenty 8-inch square stainless-steel shims, 0.002 in. thick with 2½-in. slots for precise spacing
- TypeShims and Shim Stock
- SizeH-8"x8"
- Precision spacing with 0.002 in stainless steel shims
- Tight ±0.0001 in thickness tolerance ensures exact alignment
- 8 in × 8 in slotted design fits around bolts without removal
- 18-8 stainless steel resists corrosion in harsh environments
- Pack of 20 provides ample supply for multiple adjustments
Precision Stainless Steel Shims
This pack supplies twenty precision-ground shims made from 18-8 stainless steel. Each piece measures eight inches square with a 0.002 inch nominal thickness. The full-hard temper and tight thickness tolerance of ±0.0001 inch ensure consistent spacing in critical assemblies. The plain silver finish resists corrosion in demanding environments.
Maintenance Teams and Precision Assemblers
Technicians aligning motors, pumps, or heavy machinery will value the repeatable thickness and generous 8 x 8 inch working area. The slotted design with a 2 1/2 inch slot width and 6 inch depth allows installation without disassembling bolted joints. Shops needing tabbed shims for retrieval, non-stainless material, or thicknesses outside the 0.002 inch spec should source alternative shim stock.
Thickness Tolerance ±0.0001 Inch
The decisive specification is the ±0.0001 inch thickness tolerance held across all twenty pieces. This precision governs whether the shim stack meets the required spacing without additional lapping or measurement. Verify that your assembly drawing calls for this exact tolerance and the 0.002 inch nominal thickness before ordering.
Highlights
- Precision spacing with 0.002 in stainless steel shims
- Tight ±0.0001 in thickness tolerance ensures exact alignment
- 8 in × 8 in slotted design fits around bolts without removal
- 18-8 stainless steel resists corrosion in harsh environments
- Pack of 20 provides ample supply for multiple adjustments
Specifications
| Brand | MAUDLIN PRODUCTS |
|---|---|
| Type | Shims and Shim Stock |
| Size | H-8"x8" |
Questions about this item
What slot width does the H-8 slotted shim provide for spacing adjustments?
Each shim has a 2 1/2 in slot width and 6 in slot depth, allowing insertion around bolts or studs without full disassembly.
What are the exact dimensions of each stainless-steel shim in the pack?
Every shim measures 8 in by 8 in with a 0.002 in thickness, held to +/- 0.0001 in tolerance on thickness and +/- 0.015 in on length and width.
How should the full-hard 18-8 stainless shims be handled during installation to avoid permanent deformation?
Because the material is tempered full hard, bend or flex the shim only once into final position; repeated bending will cause work hardening and may crack the 0.002 in stock.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
