Maudlin Products
Maudlin Products 316 Stainless Steel Shim Roll 6 x 50 In 0.025 In Thick
316 stainless steel shim roll, 6 in × 50 in × 0.025 in, annealed for spacing and alignment
- TypeShims and Shim Stock
- Size6 x 50"
- Precise alignment with ±0.001 in thickness tolerance
- Corrosion-resistant 316 stainless steel meets AMS 5906B
- Soft annealed temper simplifies cutting and forming
- 50 in roll length covers multiple spacing tasks
- 185,000 psi tensile strength handles heavy loads
Precision shim stock for tight-tolerance spacing
This 316 stainless steel shim roll measures six inches wide by fifty inches long with a nominal thickness of .025 inch. The material is annealed to a soft temper and meets AMS 5906B and ASTM A 666 03 quality standards for consistent mechanical properties.
Holds dimensions through repeated handling and load
Thickness tolerance is held to plus or minus .001 inch while width tolerance stays within .005 inch and length tolerance within .250 inch. Rockwell hardness ranges from C 40 to C 45 and tensile strength reaches 185 000 psi so the stock resists permanent set when clamped or bolted in place.
Verify thickness and alloy match your stack-up
Confirm that .025 inch is the exact shim thickness required and that 316 stainless provides the corrosion resistance your environment demands. The roll is supplied in a small pack with a plain silver finish and no adhesive backing.
Highlights
- Precise alignment with ±0.001 in thickness tolerance
- Corrosion-resistant 316 stainless steel meets AMS 5906B
- Soft annealed temper simplifies cutting and forming
- 50 in roll length covers multiple spacing tasks
- 185,000 psi tensile strength handles heavy loads
Specifications
| Brand | MAUDLIN PRODUCTS |
|---|---|
| Type | Shims and Shim Stock |
| Size | 6 x 50" |
Questions about this item
Does the 316 stainless steel shim roll generate any heat or noise when used continuously in a machine?
No, the 316 stainless steel shim roll is a passive metal component with no moving parts, so it produces no heat or noise during continuous operation.
What tools or equipment are needed to cut and install the 6-inch by 50-inch shim roll?
Standard metal-cutting tools such as tin snips, shears, or a band saw are required to cut the annealed 316 stainless material to the desired shape and length.
Will the 0.025-inch thick shim roll work alongside older carbon steel shims without causing galvanic corrosion?
Direct contact between 316 stainless steel and carbon steel in a moist environment can cause galvanic corrosion; use an insulating barrier or coating between the dissimilar metals.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
