Maudlin Products
Maudlin Products 316-007-12-50 Shim Roll 12x50 In 0.007 In Thick Annealed Stainless Steel 316 Hand Tool
Annealed 316 stainless steel shim roll, 12 by 50 inches and 0.007 inch thick, meets AMS 5906B and ASTM A666 standards
- TypeAngle, Pitch & Slope Locators
- Precise alignment with ±0.001 in thickness tolerance
- Corrosion-resistant 316 stainless for harsh environments
- Annealed temper allows easy forming by hand
- Meets AMS 5906B and ASTM A666 standards
- 12 in × 50 in roll covers large jobs
Shim Roll 12x50 In 0.007 In Thick
This shim roll measures twelve inches wide by fifty inches long with a thickness of 0.007 inches. It is made from annealed stainless steel grade 316 and meets AMS 5906B and ASTM-A-666-03 standards. Machinists and maintenance technicians use it for precise spacing and alignment tasks.
Tolerances and Material Limits
Length tolerance is plus or minus 0.250 inches while width tolerance is plus or minus 0.010 inches. Thickness tolerance is held to plus or minus 0.001 inches. The soft temper provides a Rockwell hardness of C40-45 and tensile strength of 185,000 psi. Buyers who need tighter flatness or different alloy grades cannot meet those needs with this roll.
Installation and Common Issues
The material cuts easily with hand shears or a knife and forms by hand for shimming applications. Its soft annealed temper prevents spring-back during fitting. The plain finish may show handling marks and the thin gauge can wrinkle if pulled unevenly across large gaps. Users who require pre-cut shapes or adhesive backing must add those steps themselves.
Highlights
- Precise alignment with ±0.001 in thickness tolerance
- Corrosion-resistant 316 stainless for harsh environments
- Annealed temper allows easy forming by hand
- Meets AMS 5906B and ASTM A666 standards
- 12 in × 50 in roll covers large jobs
Specifications
| Brand | Maudlin Products |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Questions about this item
Should I choose the 0.007 in thickness roll or a different gauge?
This roll is 0.007 in thick with a +/- 0.001 in tolerance; select it when your shim stack requires that exact gauge.
What does the 185,000 psi tensile strength mean once the shim is installed?
It indicates the annealed 316 stainless can withstand high clamping loads without permanent deformation in spacing applications.
How does the AMS 5906B standard cap the material properties in practice?
AMS 5906B governs the 316 annealed composition and the Rockwell C40-45 hardness range you receive on this roll.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
