Master Manufacturing
Master Manufacturing Swivel Stem Caster Rubber 2 in 75 lb 31107
Swivel stem caster with a 2 in rubber wheel supports 75 lb load capacity
- TypeWheelbarrows & Carts
- Swivels freely for easy steering around obstacles
- Supports up to 75 lb per caster for heavy loads
- 2 in rubber wheel rolls smoothly on rough ground
- 13/16 in wheel width adds stability on soft surfaces
- High nickel frame finish resists corrosion outdoors
Swivel Stem Caster for Yard Equipment
This swivel stem caster fits wheelbarrows and carts that need a 2 in rubber wheel. It carries a 75 lb load rating within a 0 to 299 lb range for light-duty yard tasks. The round wheel measures 13/16 in wide and uses a high-nickel frame finish. It is sold new and ready to install.
Thermals Noise and Power in Normal Use
As a passive wheel component the caster generates no heat and draws no power during operation. Noise comes only from the rubber tread rolling over surfaces and the swivel race turning under load. The rubber material helps dampen vibration on rough ground. No electrical or thermal specifications apply to this item.
Behaviour Under Sustained Load
The 75 lb rating applies to continuous static and rolling loads within the stated range. Rubber tread wear will increase gradually with extended use on abrasive surfaces. The high-nickel frame finish resists corrosion during prolonged outdoor exposure. California Proposition 65 warnings note chemicals known to cause cancer and reproductive harm.
Highlights
- Swivels freely for easy steering around obstacles
- Supports up to 75 lb per caster for heavy loads
- 2 in rubber wheel rolls smoothly on rough ground
- 13/16 in wheel width adds stability on soft surfaces
- High nickel frame finish resists corrosion outdoors
Specifications
| Brand | Zoro Select |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
How do I install the 13/16 in stem on the 31107 caster, and what step is often missed?
Insert the round stem into the mounting hole and secure it with a retaining ring or set screw; the step often missed is fully seating the stem before tightening the fastener.
What maintenance will the rubber wheel on this 75 lb caster need later?
Inspect the rubber tread for cracks or flat spots and clean debris from the swivel raceway; lubricate the swivel bearing periodically to maintain smooth rotation.
What limit appears first when this 2 in caster runs at the 75 lb rating continuously?
The rubber tread will heat up and develop flat spots under sustained 75 lb loads, reducing roll quality before the frame or swivel mechanism fails.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
