Master Magnetics
Master Magnetics ZG05ACX50 Magnetic Strip 50 ft 1/4 in W 0.06 in Thick 2.75 lb Pull
A 50 ft flexible magnetic strip with adhesive backing holds up to 2.75 lb per foot and works from -15 to 160 °F
- TypeClamps
- 50 ft roll covers long runs without splicing
- 75 lb pull per foot holds fixtures securely
- 1/4 in width fits narrow channels and trim
- Adhesive backing bonds indoors and outdoors
- Operates from -15 to 160 °F without losing strength
Flexible magnetic strip for custom mounting
The Master Magnetics ZG05ACX50 is a 50 ft roll of flexible magnetic strip with adhesive on the non-magnetic side. It provides a maximum pull of 2.75 lb per linear foot. The strip measures 1/4 in wide and 0.06 in thick. It is designed for indoor or outdoor use where a removable magnetic attachment is required.
Suited for light-duty holding and signage
This strip works well for securing lightweight signs, displays, or fixtures to ferrous surfaces. It also serves for organising tools or creating custom magnetic closures. Buyers needing to hold heavier loads or requiring a rigid mounting solution should consider alternative fastening methods. The adhesive backing is not intended for structural bonding on non-ferrous materials.
Integrates into ferrous surfaces
The flexible rubber polymer and ferrite blend conforms to flat or slightly curved steel surfaces. The adhesive side bonds to the object being mounted, freeing the user from drilling or permanent hardware. Operating stability ranges from 15 to 160 degrees F, so it remains functional in typical workshop or vehicle environments. Cut the roll to the exact length needed for each application.
Highlights
- 50 ft roll covers long runs without splicing
- 75 lb pull per foot holds fixtures securely
- 1/4 in width fits narrow channels and trim
- Adhesive backing bonds indoors and outdoors
- Operates from -15 to 160 °F without losing strength
Specifications
| Brand | Master Magnetics |
|---|---|
| Model | ZG05ACX50 |
| Type | Clamps |
Questions about this item
What surface must I already have ready for the adhesive side to bond properly?
The strip has adhesive on one side and needs a clean, dry surface indoors or outdoors; it works from -15 °F to 160 °F.
Can I use this magnetic strip alongside older metal fixtures that are thinner than 1/4 in?
Yes, the 2.75 lb pull rating holds through typical gaps, so existing thin fixtures will still be attracted.
How do I confirm the 50 ft roll is performing at its rated 2.75 lb pull after installation?
Attach a known 2.75 lb ferrous weight to the magnetic face; if it holds without sliding, the strip is working as specified.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
