Master Lock
Master Lock 453XL Cinch Sack Cover Red 1/4 in 25 in 26 in 10 in
Red nylon cinch-sack lockout cover fits switches up to 25 in long and 8 in wide, accepts six padlocks with 1/4 in shackles, and meets OSHA requirements
- Red nylon cover cinches tight for visible lockout
- Fits switches up to 25 in long and 8 in wide
- Overall size 26 in by 10 in covers oversize plugs
- Accepts up to six padlocks with 1/4 in shackles
- Meets OSHA lockout/tagout requirements for energy isolation
Oversize Plug and Hoist Lockout Cover
The Master Lock 453XL is a red nylon cinch sack designed to secure oversize plugs and hoist controls during maintenance. It fits switches up to 25 inches long and 8 inches wide, accommodating a maximum padlock shackle diameter of 1/4 inch. The cover supports up to six padlocks for group lockout procedures and displays a "Locked Out Do Not Remove" legend. It meets OSHA standards for lockout devices.
Fits Switches Up to 25 Inches Long
The single specification that determines compatibility is the maximum switch length of 25 inches and maximum width of 8 inches. The cinch sack design allows it to envelop irregularly shaped plugs and hoist controls that standard rigid lockouts cannot cover. Verify your equipment dimensions against these limits before purchase. The 1/4 inch maximum shackle diameter also dictates which padlocks can be used with this device.
Nylon Construction Withstands Industrial
The nylon lockout material resists tearing, chemicals and temperature extremes common in industrial settings. The cinch closure seals tightly around cords without pinch points that could damage insulation. At 26 inches overall length and 10 inches wide, the sack adds minimal bulk while fully enclosing the switch. No power draw or noise is generated as this is a passive mechanical safety device.
Highlights
- Red nylon cover cinches tight for visible lockout
- Fits switches up to 25 in long and 8 in wide
- Overall size 26 in by 10 in covers oversize plugs
- Accepts up to six padlocks with 1/4 in shackles
- Meets OSHA lockout/tagout requirements for energy isolation
Specifications
| Brand | MASTER LOCK |
|---|
Questions about this item
What does the 25 in maximum switch length mean for my equipment?
The cover fits switches up to 25 in long, so measure your device before ordering to confirm it will fully enclose the control.
How does the 1/4 in padlock shackle limit work with the six padlock positions?
Each of the six padlock holes accepts a shackle no thicker than 1/4 in, allowing multiple workers to lock out the same energy source.
Will the 26 in by 10 in overall size clear the space around my hoist control?
The sack measures 26 in long by 10 in wide, so check the clearance around your control station to ensure it can cinch closed without obstruction.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
