Master Appliance
Master Appliance Ultratorch UT-100SI Butane Soldering Kit 1202°F 5 Tips
Butane-powered soldering iron kit with five interchangeable tips reaching 1,202 °F for soldering, heat-shrinking and torch work
- TypeButane Powered
- Butane powered for cordless freedom on any job site
- Self-igniting start lights the tip instantly without extra tools
- Four functions in one kit: soldering iron, torch, hot air and knife
- Adjustable output from 20 W to 80 W equivalent for delicate or heavy work
- Runs up to 120 minutes on a single fill
Master Appliance Ultratorch UT-100SI Butane Kit
The Master Appliance Ultratorch UT-100SI is a cordless butane-powered soldering kit built for field service and on-site repairs. It ships with five interchangeable tips covering chisel, heat shrink, hot air, knife and needle profiles. The self-igniting mechanism removes the need for a separate lighter. Maximum torch temperature reaches 2,500 Degrees F for broad heating tasks.
Suited for mobile technicians needing flameless heat
This kit suits mobile technicians who need a portable flameless heat tool for soldering, heat-shrink tubing or light cutting without mains power. The 120-minute run time supports extended jobs away from a bench. Buyers who require continuous high-wattage output for heavy joints or who need temperature readouts should look at something else.
80 W equivalence with 120-minute run time
Electric iron power equivalence spans 20 W to 80 W, giving headroom for delicate 0.5 mm needle work up to wider 8 mm chisel tasks. Maximum solder tip temperature is 932 Degrees F while the hot air tip peaks at 1,202 Degrees F. The butane tank delivers roughly 120 minutes of operation before refill, limiting non-stop use on long production runs.
Highlights
- Butane powered for cordless freedom on any job site
- Self-igniting start lights the tip instantly without extra tools
- Four functions in one kit: soldering iron, torch, hot air and knife
- Adjustable output from 20 W to 80 W equivalent for delicate or heavy work
- Runs up to 120 minutes on a single fill
Specifications
| Brand | Master Appliance |
|---|---|
| Type | Butane Powered |
Questions about this item
What butane fuel do I need to run the Ultratorch UT-100SI?
The kit requires standard butane refill canisters, which are sold separately. One fill provides up to 120 minutes of continuous operation.
Can I use the hot-air tip on heat-shrink tubing rated for lower temperatures?
Yes. The hot-air tip reaches a maximum of 1,202 °F, while the solder tips run up to 932 °F. Adjust the flame control toward the 20 W equivalent setting for gentler heat.
How do I confirm the self-igniting piezo is working after I fill the tank?
Open the gas valve, press the ignition button and look for an immediate flame at the torch tip. A steady blue flame means the piezo and fuel flow are both functioning correctly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
