Markel Products
Markel Products FEP-7648-3RA 480VAC 3 Phase 9.1 HVAC Control
Hazardous-location electric heater rated 480 V AC three-phase with 7.6 kW output and 25,938 BtuH capacity
- Rated for Class I Division 1 and 2 hazardous areas
- 6 kW output delivers 25,938 BtuH heating capacity
- 480 V AC three-phase power suits industrial supply
- Steel cabinet with powder-coated epoxy finish resists corrosion
- Wall-mounted convection design saves floor space
Hazardous-location electric heater
The Markel Products FEP-7648-3RA is a convection heater rated for Class I, Groups B, C and D, Division 1 and 2 environments. It delivers 7.6 kW output at 480V AC three-phase power with a heating capacity of 25,938 BtuH. The unit suits industrial facilities needing code-compliant warmth in hazardous areas.
Verify voltage, phase and mounting before ordering
Confirm the supply provides 480V AC three-phase power and that the wall can support a surface-mounted cabinet measuring 18 in high, 58 in wide and 9 in deep. Ensure the thermostat control matches your control scheme and that the location meets the hazardous-area classification. The gray powder-coated epoxy steel housing fits the stated footprint.
Integrates into hazardous-area HVAC systems
The heater frees up floor space by mounting on the wall and uses convection heat without forced air. It requires a compatible thermostat and a three-phase supply sized for 7.6 kW. The steel cabinet with epoxy finish resists corrosion in harsh environments while the hazardous-location rating permits installation where standard heaters cannot operate.
Highlights
- Rated for Class I Division 1 and 2 hazardous areas
- 6 kW output delivers 25,938 BtuH heating capacity
- 480 V AC three-phase power suits industrial supply
- Steel cabinet with powder-coated epoxy finish resists corrosion
- Wall-mounted convection design saves floor space
Specifications
| Brand | MARKEL PRODUCTS |
|---|
Questions about this item
What mounting hardware comes with the heater and what must I supply?
The unit is designed for surface wall mounting; the cabinet measures 18 in high by 58 in wide by 9 in deep, so suitable lag bolts or anchors for the wall structure are required separately.
Which voltage and phase configuration matches my facility?
This model operates on 480 V AC three-phase power and delivers 7.6 kW output.
How much heat does the 7.6 kW rating actually provide in the space?
The heater produces 25,938 BtuH through convection, warming the surrounding air in the hazardous-location area.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
