Marine Sport Lighting
Marine Sport Lighting 24in LED Strip Starboard Port Boating Maintenance
A 24-inch red and green LED bow light kit with IP67 water resistance and 3M adhesive for 12 V DC systems
- ColorTransparent
- Meets federal navigation colour rules with dedicated red and green strips
- IP67 rated for reliable operation in heavy spray and submersion
- 3M adhesive backing secures strips to curved bow surfaces
- Low 12 V draw at 0.02 A per LED conserves battery power
- Flexible 24 in length moulds to bends and angles for universal fit
Navigation Light Kit
This Marine Sport Lighting kit provides red and green LED strips for starboard and port bow navigation. It is designed for boat owners who need compliant visibility on waterways at night. The 24-inch strips help other vessels see your craft clearly. They meet federal colour regulations for navigation lights.
Flexible Mounting and Low Draw
Each strip uses heavy-duty 3M adhesive backing for secure attachment to curved or angled surfaces. The IP67 rating confirms high water resistance for marine environments. Operating at 12 volts DC, the system draws only 0.02 amps per LED chip. This low current leaves ample capacity for other onboard electronics.
Sustained Operation
At 0.25 watts per LED chip, the strips generate minimal heat during continuous overnight use. The weatherproof construction maintains performance through spray, humidity and temperature shifts. Four included end caps seal the cut ends against moisture ingress. The kit is not suited for vessels requiring longer runs beyond the supplied length.
Highlights
- Meets federal navigation colour rules with dedicated red and green strips
- IP67 rated for reliable operation in heavy spray and submersion
- 3M adhesive backing secures strips to curved bow surfaces
- Low 12 V draw at 0.02 A per LED conserves battery power
- Flexible 24 in length moulds to bends and angles for universal fit
Specifications
| Color | Transparent |
|---|---|
| Brand | MARINE SPORT LIGHTING |
Questions about this item
How long can the 12 V LED strips run before the 3M adhesive backing fails from heat?
Each LED chip draws only 0.25 W and 0.02 A, so heat buildup is minimal and the heavy-duty 3M tape is rated for continuous marine use.
What noise, heat or power draw should I expect when the bow lights stay on all night?
The strips are silent solid-state LEDs; at 0.25 W per chip the total draw stays low on a 12 V system and they remain cool to the touch.
Does the kit include the 12 V power supply and switch, or must I provide them?
The kit supplies one red and one green IP67 strip plus four end caps; you must provide a 12 V DC source, fuse and switch to complete the installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



